Tzafrir Cohen wrote: > On Fri, Apr 18, 2008 at 04:15:32PM +0200, giuliano curti wrote: >> On Thu, 17 Apr 2008 13:25:19 +0100 >> Alan Lord <[EMAIL PROTECTED]> wrote: >> >> [cut] >> >>> I bought an X100p card from ...... >> I have a similar card (X101P Tiger Jet) but seems does not >> recognize dmtf: external pstn callers cannot select from menu >> options, that is asterisk doesn't route the ext user selection >> coming from the channel Zap/1; > > While I do agree that those cards are not the best, I believe that DTMF > issues may not be directly their problem. <snip />
I can confirm that the card I purchased works fine with DTMF tones :-) I have a simple IVR setup and can access voicemail boxes etc with no trouble at all. I am using the card with zaptel 1.4.9.2 (but a much older 1.4.5 or similar was fine too) and the OSLEC echo canceller. My zaptel.conf is this: loadzone=uk defaultzone=uk fxsks=1 My zapata.conf is this: ; Zapata telephony interface ; ; Configuration file [channels] ;Hardware defaults for the x100p card usecallerid=yes hidecallerid=no threewaycalling=yes transfer=yes echocancel=yes echotrainingwhenbridged=no cidsignalling=v23 ; Added for UK CLI detection ;cidstart=usehist ; After patching the driver from here : ; http://www.lusyn.com/resources/asterisk/usehist.htm callerid=asreceived ; propagate the CID received from BT rxgain=6.0 txgain=6.0 ;define channel context=main_menu language=en signalling=fxs_ks channel => 1 ;Our x100p FYI - I have not got CLI detection to work (yet) but I'm not sure if I have it enabled on my line and it wasn't a priority for me ;-) But I must say, since I discovered OSLEC, the card has worked a treat! Not bad for £17.00. Before I tried OSLEC echo was pretty bad. HTH Alan -- The way out is open! http://www.theopensourcerer.com _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
