Hello Eduardo, Wednesday, December 17, 2003, 1:08:00 AM, you wrote:
EG> Hi list, EG> I'm with a little problem on codec negotiation between a cisco827 and EG> asterisk. EG> My sip.conf is like that: EG> [general] EG> port = 5060 EG> bindaddr = 0.0.0.0 EG> context = default EG> amaflags = default EG> allow=g729 EG> allow=gsm EG> allow=alaw EG> allow=ulaw EG> ;disallow=all EG> and cisco like that: EG> dial-peer voice 6 voip EG> destination-pattern 0T EG> session protocol sipv2 EG> session target ipv4:<asterisk-ip> EG> dtmf-relay rtp-nte EG> codec g711alaw EG> no vad EG> ! EG> When I try to make a call, cisco shows codec g711alaw, but asterisk EG> shows codec g729A (i have the licenses) and there is no audio. When I EG> try disallow=g729, the same occurs, but this time asterisk shows codec EG> gsm. EG> The only way to make a call is allowing only alaw. But this is not EG> convenience, since i need to use g279 with another endpoint (working EG> ok). EG> Why this negotiation problem happens? Try to add to cisco peer (not shown in your mail) [cisco] .... disallow=all allow=alaw -- Best regards, Nguyen mailto:[EMAIL PROTECTED] _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users