I have a problem calling a certain number from our PRI line. Calling the number from a separate PSTN phone works fine.
The remote number seems to have some funny call redivert setup, when you call it, it answers immediately, makes some kind of beep and then starts to ring. Our PRI is in the UK from Telewest/NTL/Virgin Media and most outgoing calls work without a problem. The server is trixbox based with a Digium TE410P PRI interface. Trixbox 2.6, Asterisk 1.4.18-3, FreeBPX 2.4. I'm no expert, but the PRI trace shows that the outgoing call is proceeding, and then seems to show that my end of the connection has disconnected the call, but I cannot work out why - it has already agreed to setup the call! What is causing this disconnect? Is there some tone detection going on behind the scenes? ======================================== [zaptel] span=1,1,0,ccs,hdb3,crc4 bchan=1-15,17-31 dchan=16 loadzone = uk defaultzone = uk ======================================== [zapata] [channels] language=en context=from-zaptel-custom usecallerid=yes hidecallerid=no restrictcid=no usecallingpres=yes overlapdial=yes echocancel=64 echocancelwhenbridged=no echotraining=yes rxgain=0.0 txgain=0.0 immediate=no faxdetect=no busydetect=no callprogress=no pridialplan=local prilocaldialplan=local group=1 switchtype = euroisdn signalling = pri_cpe channel => 1-8 ======================================== PRI Trace < [ 02 01 01 2b ] < Supervisory frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 000 EA: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 021 P/F: 1 < 0 bytes of data -- ACKing all packets from 20 to (but not including) 21 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter -- Unsolicited RR with P/F bit, responding Sending Receiver Ready (23) > [ 02 01 01 2f ] > Supervisory frame: > SAPI: 00 C/R: 1 EA: 0 > TEI: 000 EA: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 023 P/F: 1 > 0 bytes of data -- Restarting T203 counter -- Restarting T203 counter -- Accepting AUTHENTICATED call from 10.1.0.46: > requested format = gsm, > requested prefs = (), > actual format = alaw, > host prefs = (ulaw|alaw|gsm), > priority = mine -- Executing [EMAIL PROTECTED]:1] Macro("IAX2/255-4", "user-callerid|SKIPTTL|") in new stack -- Executing [EMAIL PROTECTED]:1] NoOp("IAX2/255-4", "user-callerid: device 255") in new stack -- Executing [EMAIL PROTECTED]:2] Set("IAX2/255-4", "AMPUSER=255") in new stack -- Executing [EMAIL PROTECTED]:3] GotoIf("IAX2/255-4", "0?report") in new stack -- Executing [EMAIL PROTECTED]:4] ExecIf("IAX2/255-4", "0|Set|REALCALLERIDNUM=255") in new stack -- Executing [EMAIL PROTECTED]:5] NoOp("IAX2/255-4", "REALCALLERIDNUM is 255") in new stack -- Executing [EMAIL PROTECTED]:6] Set("IAX2/255-4", "AMPUSER=255") in new stack -- Executing [EMAIL PROTECTED]:7] Set("IAX2/255-4", "AMPUSERCIDNAME=Alastair Battrick") in new stack -- Executing [EMAIL PROTECTED]:8] GotoIf("IAX2/255-4", "0?report") in new stack -- Executing [EMAIL PROTECTED]:9] Set("IAX2/255-4", "AMPUSERCID=255") in new stack -- Executing [EMAIL PROTECTED]:10] Set("IAX2/255-4", "CALLERID(all)="Alastair Battrick" <255>") in new stack -- Executing [EMAIL PROTECTED]:11] Set("IAX2/255-4", "REALCALLERIDNUM=255") in new stack -- Executing [EMAIL PROTECTED]:12] ExecIf("IAX2/255-4", "0|Set|CHANNEL(language)=") in new stack -- Executing [EMAIL PROTECTED]:13] NoOp("IAX2/255-4", "TTL: ARG1: SKIPTTL") in new stack -- Executing [EMAIL PROTECTED]:14] GotoIf("IAX2/255-4", "1?continue") in new stack -- Goto (macro-user-callerid,s,23) -- Executing [EMAIL PROTECTED]:23] NoOp("IAX2/255-4", "Using CallerID "Alastair Battrick" <255>") in new stack -- Executing [EMAIL PROTECTED]:2] Set("IAX2/255-4", "_NODEST=") in new stack -- Executing [EMAIL PROTECTED]:3] Macro("IAX2/255-4", "record-enable|255|OUT|") in new stack -- Executing [EMAIL PROTECTED]:1] GotoIf("IAX2/255-4", "0?2:4") in new stack -- Goto (macro-record-enable,s,4) -- Executing [EMAIL PROTECTED]:4] AGI("IAX2/255-4", "recordingcheck|20080428-134020|1209386420.22") in new stack -- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck recordingcheck|20080428-134020|1209386420.22: Outbound recording not enabled -- AGI Script recordingcheck completed, returning 0 -- Executing [EMAIL PROTECTED]:5] NoOp("IAX2/255-4", "No recording needed") in new stack -- Executing [EMAIL PROTECTED]:4] Macro("IAX2/255-4", "dialout-trunk|1|02081237722||") in new stack -- Executing [EMAIL PROTECTED]:1] Set("IAX2/255-4", "DIAL_TRUNK=1") in new stack -- Executing [EMAIL PROTECTED]:2] ExecIf("IAX2/255-4", "0|Authenticate|") in new stack -- Executing [EMAIL PROTECTED]:3] GotoIf("IAX2/255-4", "0?disabletrunk|1") in new stack -- Executing [EMAIL PROTECTED]:4] Set("IAX2/255-4", "DIAL_NUMBER=02081237722") in new stack -- Executing [EMAIL PROTECTED]:5] Set("IAX2/255-4", "DIAL_TRUNK_OPTIONS=tr") in new stack -- Executing [EMAIL PROTECTED]:6] Set("IAX2/255-4", "GROUP()=OUT_1") in new stack -- Executing [EMAIL PROTECTED]:7] GotoIf("IAX2/255-4", "0?nomax") in new stack -- Executing [EMAIL PROTECTED]:8] GotoIf("IAX2/255-4", "0?chanfull") in new stack -- Executing [EMAIL PROTECTED]:9] GotoIf("IAX2/255-4", "0?skipoutcid") in new stack -- Executing [EMAIL PROTECTED]:10] Set("IAX2/255-4", "DIAL_TRUNK_OPTIONS=") in new stack -- Executing [EMAIL PROTECTED]:11] Macro("IAX2/255-4", "outbound-callerid|1") in new stack -- Executing [EMAIL PROTECTED]:1] ExecIf("IAX2/255-4", "0|SetCallingPres|") in new stack -- Executing [EMAIL PROTECTED]:2] GotoIf("IAX2/255-4", "1?start") in new stack -- Goto (macro-outbound-callerid,s,4) -- Executing [EMAIL PROTECTED]:4] NoOp("IAX2/255-4", "REALCALLERIDNUM is 255") in new stack -- Executing [EMAIL PROTECTED]:5] GotoIf("IAX2/255-4", "1?normcid") in new stack -- Goto (macro-outbound-callerid,s,10) -- Executing [EMAIL PROTECTED]:10] Set("IAX2/255-4", "USEROUTCID="Alastair Battrick" <0255>") in new stack -- Executing [EMAIL PROTECTED]:11] Set("IAX2/255-4", "EMERGENCYCID=") in new stack -- Executing [EMAIL PROTECTED]:12] Set("IAX2/255-4", "TRUNKOUTCID=") in new stack -- Executing [EMAIL PROTECTED]:13] GotoIf("IAX2/255-4", "1?trunkcid") in new stack -- Goto (macro-outbound-callerid,s,17) -- Executing [EMAIL PROTECTED]:17] GotoIf("IAX2/255-4", "1?usercid") in new stack -- Goto (macro-outbound-callerid,s,19) -- Executing [EMAIL PROTECTED]:19] GotoIf("IAX2/255-4", "0?report") in new stack -- Executing [EMAIL PROTECTED]:20] Set("IAX2/255-4", "CALLERID(all)=Alastair Battrick <0255>") in new stack -- Executing [EMAIL PROTECTED]:21] GotoIf("IAX2/255-4", "1?report:hidecid") in new stack -- Goto (macro-outbound-callerid,s,23) -- Executing [EMAIL PROTECTED]:23] NoOp("IAX2/255-4", "CallerID set to "Alastair Battrick" <0255>") in new stack -- Executing [EMAIL PROTECTED]:12] AGI("IAX2/255-4", "fixlocalprefix") in new stack -- Launched AGI Script /var/lib/asterisk/agi-bin/fixlocalprefix -- AGI Script fixlocalprefix completed, returning 0 -- Executing [EMAIL PROTECTED]:13] Set("IAX2/255-4", "OUTNUM=02081237722") in new stack -- Executing [EMAIL PROTECTED]:14] Set("IAX2/255-4", "custom=ZAP/g1") in new stack -- Executing [EMAIL PROTECTED]:15] GotoIf("IAX2/255-4", "1?gocall") in new stack -- Goto (macro-dialout-trunk,s,17) -- Executing [EMAIL PROTECTED]:17] Macro("IAX2/255-4", "dialout-trunk-predial-hook|") in new stack -- Executing [EMAIL PROTECTED]:18] GotoIf("IAX2/255-4", "0?bypass|1") in new stack -- Executing [EMAIL PROTECTED]:19] GotoIf("IAX2/255-4", "0?customtrunk") in new stack -- Executing [EMAIL PROTECTED]:20] Dial("IAX2/255-4", "ZAP/g1/02081237722|300|") in new stack -- Making new call for cr 32778 -- Requested transfer capability: 0x00 - SPEECH pbx*CLI> > [ 00 01 2a 2e 08 02 00 0a 05 04 03 80 90 a3 18 03 a9 83 81 6c 06 41 81 30 32 35 35 70 0c c1 30 32 30 38 31 32 33 37 37 32 32 ] pbx*CLI> > Informational frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1 > N(S): 021 0: 0 > N(R): 023 P: 0 > 37 bytes of data -- Restarting T203 counter Stopping T_203 timer Starting T_200 timer > Protocol Discriminator: Q.931 (8) len=37 > Call Ref: len= 2 (reference 10/0xA) (Originator) > Message type: SETUP (5) > [04 03 80 90 a3] > Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Speech (0) > Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16) > Ext: 1 User information layer 1: A-Law (35) > [18 03 a9 83 81] > Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Exclusive Dchan: 0 > ChanSel: Reserved > Ext: 1 Coding: 0 Number Specified Channel Type: 3 > Ext: 1 Channel: 1 ] > [6c 06 41 81 30 32 35 35] > Calling Number (len= 8) [ Ext: 0 TON: Subscriber Number (4) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) > Presentation: Presentation permitted, user number passed network screening (1) '0255' ] > [70 0c c1 30 32 30 38 31 32 33 37 37 32 32] > Called Number (len=14) [ Ext: 1 TON: Subscriber Number (4) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) '02081237722' ] q931.c:2881 q931_setup: call 32778 on channel 1 enters state 1 (Call Initiated) -- Called g1/02081237722 pbx*CLI> < [ 00 01 01 2c ] < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 000 EA: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 022 P/F: 0 < 0 bytes of data -- ACKing all packets from 20 to (but not including) 22 -- ACKing packet 21, new txqueue is -1 (-1 means empty) -- Since there was nothing left, stopping T200 counter -- Nothing left, starting T203 counter -- Restarting T203 counter pbx*CLI> < [ 02 01 2e 2c 08 02 80 0a 02 18 03 a9 83 81 ] < Informational frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 000 EA: 1 < N(S): 023 0: 0 < N(R): 022 P: 0 < 10 bytes of data -- ACKing all packets from 21 to (but not including) 22 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter < Protocol Discriminator: Q.931 (8) len=10 < Call Ref: len= 2 (reference 10/0xA) (Terminator) < Message type: CALL PROCEEDING (2) < [18 03 a9 83 81] < Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Exclusive Dchan: 0 < ChanSel: Reserved < Ext: 1 Coding: 0 Number Specified Channel Type: 3 < Ext: 1 Channel: 1 ] -- Processing IE 24 (cs0, Channel Identification) q931.c:3428 q931_receive: call 32778 on channel 1 enters state 3 (Outgoing call Proceeding) Sending Receiver Ready (24) > [ 02 01 01 30 ] > Supervisory frame: > SAPI: 00 C/R: 1 EA: 0 > TEI: 000 EA: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 024 P/F: 0 > 0 bytes of data -- Restarting T203 counter -- Restarting T203 counter -- Zap/1-1 is proceeding passing it to IAX2/255-4 pbx*CLI> < [ 02 01 30 2c 08 02 80 0a 45 08 02 8a a2 1e 02 82 88 ] < Informational frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 000 EA: 1 < N(S): 024 0: 0 < N(R): 022 P: 0 < 13 bytes of data -- ACKing all packets from 21 to (but not including) 22 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter < Protocol Discriminator: Q.931 (8) len=13 < Call Ref: len= 2 (reference 10/0xA) (Terminator) < Message type: DISCONNECT (69) < [08 02 8a a2] < Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: Network beyond the interworking point (10) < Ext: 1 Cause: Circuit/channel congestion (34), class = Network Congestion (resource unavailable) (2) ] < [1e 02 82 88] < Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Public network serving the local user (2) < Ext: 1 Progress Description: Inband information or appropriate pattern now available. (8) ] -- Processing IE 8 (cs0, Cause) -- Processing IE 30 (cs0, Progress Indicator) q931.c:3563 q931_receive: call 32778 on channel 1 enters state 12 (Disconnect Indication) Sending Receiver Ready (25) > [ 02 01 01 32 ] > Supervisory frame: > SAPI: 00 C/R: 1 EA: 0 > TEI: 000 EA: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 025 P/F: 0 > 0 bytes of data -- Restarting T203 counter -- Restarting T203 counter -- Channel 0/1, span 1 got hangup request, cause 34 -- Zap/1-1 is circuit-busy NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Disconnect Indication, peerstate Disconnect Request q931.c:2716 q931_release: call 32778 on channel 1 enters state 19 (Release Request) > [ 00 01 2c 32 08 02 00 0a 4d 08 02 81 a2 ] > Informational frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1 > N(S): 022 0: 0 > N(R): 025 P: 0 > 9 bytes of data -- Restarting T203 counter Stopping T_203 timer Starting T_200 timer > Protocol Discriminator: Q.931 (8) len=9 > Call Ref: len= 2 (reference 10/0xA) (Originator) > Message type: RELEASE (77) > [08 02 81 a2] > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: Private network serving the local user (1) > Ext: 1 Cause: Circuit/channel congestion (34), class = Network Congestion (resource unavailable) (2) ] -- Hungup 'Zap/1-1' == Everyone is busy/congested at this time (1:0/1/0) -- Executing [EMAIL PROTECTED]:21] Goto("IAX2/255-4", "s-CONGESTION|1") in new stack -- Goto (macro-dialout-trunk,s-CONGESTION,1) -- Executing [EMAIL PROTECTED]:1] GotoIf("IAX2/255-4", "1?noreport") in new stack -- Goto (macro-dialout-trunk,s-CONGESTION,3) -- Executing [EMAIL PROTECTED]:3] NoOp("IAX2/255-4", "TRUNK Dial failed due to CONGESTION - failing through to other trunks") in new stack -- Executing [EMAIL PROTECTED]:5] Macro("IAX2/255-4", "outisbusy|") in new stack -- Executing [EMAIL PROTECTED]:1] Playback("IAX2/255-4", "all-circuits-busy-now|noanswer") in new stack -- <IAX2/255-4> Playing 'all-circuits-busy-now' (language 'en') pbx*CLI> < [ 00 01 01 2e ] < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 000 EA: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 023 P/F: 0 < 0 bytes of data -- ACKing all packets from 21 to (but not including) 23 -- ACKing packet 22, new txqueue is -1 (-1 means empty) -- Since there was nothing left, stopping T200 counter -- Nothing left, starting T203 counter -- Restarting T203 counter pbx*CLI> < [ 02 01 32 2e 08 02 80 0a 5a ] < Informational frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 000 EA: 1 < N(S): 025 0: 0 < N(R): 023 P: 0 < 5 bytes of data -- ACKing all packets from 22 to (but not including) 23 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter < Protocol Discriminator: Q.931 (8) len=5 < Call Ref: len= 2 (reference 10/0xA) (Terminator) < Message type: RELEASE COMPLETE (90) q931.c:3503 q931_receive: call 32778 on channel 1 enters state 0 (Null) NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null Sending Receiver Ready (26) > [ 02 01 01 34 ] > Supervisory frame: > SAPI: 00 C/R: 1 EA: 0 > TEI: 000 EA: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 026 P/F: 0 > 0 bytes of data -- Restarting T203 counter -- Restarting T203 counter -- Executing [EMAIL PROTECTED]:2] Playback("IAX2/255-4", "pls-try-call-later|noanswer") in new stack -- <IAX2/255-4> Playing 'pls-try-call-later' (language 'en') -- Executing [EMAIL PROTECTED]:3] Macro("IAX2/255-4", "hangupcall") in new stack -- Executing [EMAIL PROTECTED]:1] ResetCDR("IAX2/255-4", "w") in new stack -- Executing [EMAIL PROTECTED]:2] NoCDR("IAX2/255-4", "") in new stack -- Executing [EMAIL PROTECTED]:3] GotoIf("IAX2/255-4", "1?skiprg") in new stack -- Goto (macro-hangupcall,s,6) -- Executing [EMAIL PROTECTED]:6] GotoIf("IAX2/255-4", "1?skipblkvm") in new stack -- Goto (macro-hangupcall,s,9) -- Executing [EMAIL PROTECTED]:9] GotoIf("IAX2/255-4", "1?theend") in new stack -- Goto (macro-hangupcall,s,11) -- Executing [EMAIL PROTECTED]:11] Hangup("IAX2/255-4", "") in new stack == Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'IAX2/255-4' in macro 'hangupcall' == Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'IAX2/255-4' in macro 'outisbusy' == Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'IAX2/255-4' -- Hungup 'IAX2/255-4' pbx*CLI> quit Executing last minute cleanups -- Alastair Battrick _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users