On Wed, Apr 30, 2008 at 07:34:08PM -0400, Andreas van dem Helge wrote: > in the CLI you can issue the command > > >zap show status > > e.g.: > > pbxserver-doral*CLI> zap show status > Description Alarms IRQ bpviol CRC4 > Wildcard X101P Board 1 RED 0 0 0 > > In this case the phone line is unplugged and the hardware is just a > cheap winmodem with the resistor removed. If the phone line were > plugged in there would not be a red alarm. Certainly any digital line > will provide the same sort of status notifications.
In that display: actually not. Here you have one line per span. PRI cards have exactly one span per port. The X100P cards also happen to have this. All the better analog cards have (at least potentially) more than one port per span. Hence you cannot use the span's alarm to signal the status of the port. (But see my other message in this thread) -- Tzafrir Cohen icq#16849755 jabber:[EMAIL PROTECTED] +972-50-7952406 mailto:[EMAIL PROTECTED] http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users