On Sun, May 18, 2008 at 5:17 PM, Joseph L. Casale
<[EMAIL PROTECTED]> wrote:
> Hi,
> I am just testing Asterisk with a softphone on a fedora box until my ip
> phones arrive
> and have a basic config so far. I am a bit confused over how to setup the
> inbound.conf
> file now. It appears as if outbound and demo works so far.
>
> Any hints would be greatly appreciated!
> jlc
>
> My sip.conf is as follows:
> [general]
> context=default
> allowguest=yes
> disallow=all
> allow=ulaw
> dtmfmode=rfc2833
> canreinvite=no
>
> [100]
> type=friend
> context=default
> disallow=all
> allow=ulaw
> host=dynamic
> username=100
> secret=100
>
> register => username:[EMAIL PROTECTED]:5060
> register => username:[EMAIL PROTECTED]:5060
>
> [carrier-sw1]
> context=default
> type=friend
> host=sip.domain.com
> username=username
> secret=password
> canreinvite=no
> insecure=port,invite
> qualify=5000
> dtmfmode=auto
> nat=no
> disallow=all
> allow=ulaw
>
> [carrier-sw2]
> **similar to above**
>
> My extensions.conf is as follows:
> [general]
> static = yes
> writeprotect = no
> clearglobalvars = no
>
> [globals]
> CONSOLE = Console/dsp
>
> [local]
> include => default
> #include outbound.conf
> #include inbound.conf
>
> [default]
> include => demo
> include => inbound
> include => outbound
>
> [demo]
> exten => _700,1,wait(1)
> exten => _700,2,answer()
> exten => _700,3,wait(1)
> exten => _700,4,playback(tt-weasels)
> exten => _700,5,hangup()
>
> [macro-dialxxxx]
> exten => s,1,Dial(SIP/[EMAIL PROTECTED],120)
> exten => s,2,Goto(s-${DIALSTATUS},1)
> exten => s-ANSWER,1,Hangup
> exten => s-CONGESTION,1,Dial(SIP/[EMAIL PROTECTED],120)
> exten => s-CONGESTION,2,Goto(ss-${DIALSTATUS},1)
> exten => s-CANCEL,1,Hangup
> exten => s-BUSY,1,Busy(30)
> exten => s-CHANUNAVAIL,1,Dial(SIP/[EMAIL PROTECTED],120)
> exten => s-CHANUNAVAIL,2,Goto(ss-${DIALSTATUS},1)
> exten => ss-ANSWER,1,Hangup
> exten => ss-CONGESTION,1,Congestion(30)
> exten => ss-CANCEL,1,Hangup
> exten => ss-BUSY,1,Busy(30)
> exten => ss-CHANUNAVAIL,1,Congestion(30)
>
> My outbound.conf is as follows:
> [outbound]
> ; NANPA
> exten => _1NXXNXXXXXX,1,Macro(dialxxxx,${EXTEN})
> ; International Calling
> exten => _011.,1,Macro(dialxxxx,${EXTEN})
>
Attach to the Asterisk console and try making a call that usually
fails with verbose set to 3 or so and post the output. It is probably
something very simple.
Your includes are probably the issue. Try bringing them all into
extensions.conf and see if it works.
Thanks,
Steve Totaro
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
