Tzafrir Cohen wrote: > On Tue, May 20, 2008 at 09:03:16AM -0400, Scott Sharkey wrote: >> Hello All, >> >> I have an older TDM400P (~5-6 years, bought as a developer kit). >> Previous versions of Trixbox worked fine with it, but I recently tried >> moving to Asterisk Now, and I am not getting the card recognized. >> Asterisk Now (And Trixbox) do not see the card, and insist on >> configuring the ZTDUMMY interface. >> >> I'm not sure how to debug this. It's an older card, and I've not >> updated bios or anything like that (not sure if that's necessary). >> >> Some selected info below: > > That information is from the trixbox system, right?
Yes, though the lspci was the same for the asterisk now, and the lsmod was very similar. I will have to reload asterisk now tonite when I get home to verify, but will do that and repost. > Can you provide the same information from the AstriskNow system? AFter I get home tonite. > Also: what is the output of: 'zaptel_hardware' ? No output at all, even with -v -Scott > >> LSPCI sees: >> >> 01:07.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN >> interface >> >> lsmod shows: >> >> Module Size Used by >> ipv6 251393 20 >> autofs4 24517 2 >> sunrpc 144253 1 >> ztdummy 9256 0 >> opvxa1200 36800 0 >> xpp_usb 20676 0 >> xpp 127040 1 xpp_usb >> wcusb 18176 0 >> wctdm 38720 0 >> wcfxo 15904 0 >> wctdm24xxp 110304 0 >> wcte11xp 28320 0 >> wct1xxp 17440 0 >> wcte12xp 63200 0 >> wct4xxp 298880 0 >> tor2 92064 0 >> zaptel 184324 14 >> ztdummy,opvxa1200,xpp,wcusb,wctdm,wcfxo,wctdm24xxp,wcte11xp,wct1xxp,wcte12xp,wct4xxp,tor2 >> oslec 13848 1 zaptel >> crc_ccitt 6337 1 zaptel >> dm_mirror 28869 0 >> dm_multipath 21577 0 >> dm_mod 58457 2 dm_mirror,dm_multipath >> parport_pc 29157 1 >> lp 15849 0 >> parport 37513 2 parport_pc,lp >> snd_intel8x0 35421 0 >> snd_ac97_codec 93025 1 snd_intel8x0 >> ac97_bus 6337 1 snd_ac97_codec >> snd_seq_dummy 7877 0 >> snd_seq_oss 32577 0 >> snd_seq_midi_event 11073 1 snd_seq_oss >> snd_seq 49713 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event >> snd_seq_device 11725 3 snd_seq_dummy,snd_seq_oss,snd_seq >> snd_pcm_oss 42945 0 >> ide_cd 40033 0 >> snd_mixer_oss 19009 1 snd_pcm_oss >> forcedeth 47561 0 >> floppy 57125 0 >> k8_edac 18177 0 >> snd_pcm 72133 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss >> edac_mc 24977 1 k8_edac >> i2c_nforce2 10945 0 >> snd_timer 24645 2 snd_seq,snd_pcm >> k8temp 9537 0 >> cdrom 36705 1 ide_cd >> i2c_core 23745 1 i2c_nforce2 >> serio_raw 10693 0 >> snd 52421 9 >> snd_intel8x0,snd_ac97_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer >> hwmon 7365 1 k8temp >> pcspkr 7105 0 >> soundcore 11552 1 snd >> snd_page_alloc 14281 2 snd_intel8x0,snd_pcm >> sata_nv 22469 0 >> libata 115833 1 sata_nv >> sd_mod 24897 0 >> scsi_mod 132685 2 libata,sd_mod >> ext3 123337 2 >> jbd 56553 1 ext3 >> ehci_hcd 32973 0 >> ohci_hcd 23261 0 >> uhci_hcd 25421 0 >> >> And ztscan says: >> >> [1] >> active=yes >> alarms=UNCONFIGURED >> description=ZTDUMMY/1 (source: RTC) 1 >> name=ZTDUMMY/1 >> manufacturer= >> devicetype=Zaptel Dummy Timing Driver >> location= >> basechan=1 >> totchans=0 >> irq=0 >> >> >> _______________________________________________ >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> >> asterisk-users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
