Hi Roland
I have 2 linksys spa-3102 working pretty good both dialing in and out
and I followed this instructions to set it up:
update to the latest firmware then:
..Go to the first tab ‘Voice’ and sixth sub-tab ‘Line 1’
....SIP Settings:
......SIP Port: Notice that it is set to 5060 for line 1 and 5061 for
PSTN Line (next tab). These port values must be correctly transferred
to the correct contexts in sip.conf.
....Proxy and registration:
......Proxy: 192.168.5.70 < The IP address of your Asterisk server
....Subscriber Information:
......Display Name: LivingRoom < This will be the test phone, but any
name would do as lone as it is used in the configuration files.
......User ID: LivingRoom
......Password: SomePassword
......Auth ID: LivingRoom < probably not needed
....Dial Plan:
......Dial Plan: (*xx|[3469]11|0|00|[2-9]xxxxxxxxx|
1xxx[2-9]xxxxxxxxxS0|xxxxxxxxxxxx.) < We have 10 digit local dialing.
The default is set for seven digit local dialing. Adjust as needed.
......Emergency Number: < Hmmm, I don’t know what to do here: it’s
probably important, but it is poor form to dial 911 just to test. . .
Help?
....Click Submit All Changes
..Go to the first tab ‘Voice’ and seventh sub-tab ‘PSTN’:
....SIP Settings:
......SIP Port: Notice that it is set to 5061 for PSTN User and 5060
for Line 1. These port values must be correctly transferred to the
correct contexts in sip.conf.
....Proxy and Registration:
......Proxy: 192.168.5.70 < The IP address of your Asterisk server
....Subscriber Information:
......Display Name: PSTN1 < I have two lines so there is an PSTN2, but
we will not discuss it here.
......User ID: PSTN1
......Password: SomePassword
......Auth ID: PSTN1 < probably not needed.
....Dial Plans:
......Dial Plan 2: (S0<:PSTN1>) < That is an S-zero. The incoming call
will be passed to your extensions.conf file with extension ‘PSTN1’
where we will Playback a greeting to the caller and then playback the
main menu of our internal users and their extension numbers. You can
also use specific extension numbers, such as: (S0<:2091>), which will
send all incoming calls to that extension for processing. This might
work best with two or more external lines where a second call comes in
while the first is being processed through the main menu and extension
capture.
....VoIP-To-PSTN Gateway Setup:
......Line 1 VoIP Caller DP: 1 < Leave this at 1. The SPA3102 will use
the Dial Plan 1 (above = (xx.)) so all your Dial Plan decision making
will be done in the Asterisk extensions.conf file. The SPA3102 will
dial out whatever Asterisk hands out.
....PSTN-To-VoIP Gateway Setup:
......PSTN Ring Thru Line 1: no < When this is ‘yes’, an incoming call
goes directly through to Line 1. We only want line 1 to ring when
Asterisk routs a call to it.
......PSTN CID for VoIP CID: yes < capture the Caller ID provided by
the incoming call and pass it through to Asterisk to display on your
internal phones.
......PSTN Caller Default DP: 2 < Change to 2. The incoming call will
be passed to your extensions.conf file with extension 's' as defined
in Dial Plan 2 (above).
......Off Hook While Calling VoIP: no < I read this in some Google
search. I don’t know what it does, but stuff seems to work. Help?
....FXO Timer Values (sec):
......PSTN Answer Delay: 5 < Delay so that you can get the CID data.
NghtShd at http://forum.voxilla.com/linksys-sipura-voip-support-forum/starter-spa3102-asterisk-setup-18612.html
claims that 5 seconds is long enough.
....Click Submit All Changes
Ciao
Roberto
On May 21, 2008, at 6:00 AM, RoLaNd RoLaNd wrote:
Hello all,
its been a while im trying to setup my asterisk/sipura 3102 to
recieve/make calls from softphones on pcs in my home..
i've set up 5 SIP extensions in sip.conf and made the dialing plan
in extensions.conf..
i could make calls from 1 sip phone to another in my home.. but i
cant call out using pstn line interface nor recieve calls..
please find below my topology as well as config info:
(192.168.0.0)
____________LAN______________
| | |
softphone asterisk sipura---------PSTN LINE
Configuration:
ASTERISK:
sip.conf
[101]
type=peer
port=5062
host=dynamic
secret=1234
context=spa
[103]
type=peer
port=5061
host=dynamic
secret=1234
context=spa
[100]
type=peer
port=5061
host=dynamic
secret=1234
context=spa
[111]
type=peer
port=5060
host=dynamic
secret=1234
context=spa
================================================== ===========
EXTENSIONS.CONF
[spa]
Exten => _1XX,1,Dial(SIP/${EXTEN})
================================================== ===========
and this is the settings i have right now for sipura 3102 in my PSTN
LINE:
http://img84.imageshack.us/my.php?image=40541922um2.jpg
http://img98.imageshack.us/my.php?image=55448347ss9.jpg
http://img262.imageshack.us/my.php?imag ... 472qz3.jpg
ps: i read so many tutorials and none seems to help..
lately whenever i try to call out using my sipphone.. it gives me
"503 service unavailable" and this is wht shows on the CLI of
asterisk when i set sip debug on..
ubuntu-pbx-desktop*CLI>
== Connect attempt from '127.0.0.1' unable to authenticate
-- Executing [EMAIL PROTECTED]:1] Dial("SIP/1003-b5f05600", "SIP/1009")
in new stack
-- Called 1009*CLI>
-- Got SIP response 410 "Gone" back from 192.168.0.111
-- SIP/1009-081741d0 is circuit-busy
== Everyone is busy/congested at this time (1:0/1/0)
== Auto fallthrough, channel 'SIP/1003-b5f05600' status is
'CONGESTION'
Invite your mail contacts to join your friends list with Windows
Live Spaces. It's easy! Try it!
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
