Steve Totaro wrote: > On Thu, May 22, 2008 at 2:02 PM, Sherwood McGowan > <[EMAIL PROTECTED]> wrote: > >> Mark Hamilton wrote: >> >>> Hi, >>> >>> Yesterday I made a change in queues.conf and so tried doing a reload >>> app_queue.so in the CLI. (Using 1.4.18). It didn't seem to do >>> anything, infact all action on CLI stopped. >>> >>> Then, I did a reload. Same thing. >>> >>> After that there was no other way.. because even stop now wouldn't >>> work, so I did a service asterisk restart >>> >>> And then asterisk kept giving the same thing on prompt "Died >>> successfully" and all that it usually says when you issue a stop now, >>> except it kept showing that on root prompt after doing a service >>> asterisk restart. >>> >>> Did a killall asterisk, and finally it stopped. >>> >>> Then started asterisk service. It was fine. >>> >>> Did a full restart at night, and it was fine. >>> >>> NOW, I wanted to do a reload again today mid-day when in full use, and >>> it still didn't work, and ALL of the above happened again. >>> >>> -- >>> >>> How do I diagnose what's causing this? >>> >>> Thanks, >>> >>> Mark. >>> >>> ------------------------------------------------------------------------ >>> >>> _______________________________________________ >>> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>> >>> asterisk-users mailing list >>> To UNSUBSCRIBE or update options visit: >>> http://lists.digium.com/mailman/listinfo/asterisk-users >>> >> I've had this problem before, haven't debugged it. I definitely look >> forward to hearing what is said about this. >> >> Example from my recent experience, I wanted to restart the server and so >> did >> >> pbx0*CLI> restart now >> >> But nothing happened...system continued to allow calls to take place. >> I've found that sometimes exiting and reconnecting to the CLI helps, but >> there have been a couple occasions where NOTHING would allow the server >> to restart save for a reboot. Even killall asterisk didn't kill the >> process.... >> >> Sherwood McGowan >> >> > > You are using Asterisk 1.2.x? I have seen this many, many times. > > Sometimes the CLI becomes unresponsive, sometimes queues crap out or > stops delivering calls to agents, sometimes it just takes a bit and > then becomes responsive again. > > The rule of thumb is don't reload queues when there are people in > queue, at least that seems to eliminate the problems I have seen. > Makes sense too. > > Not sure if it is fixed in 1.4. > > Thanks, > Steve Totaro > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > Oh and also, in my implementation there are no queues. It seems to be not related, I've had it in EVERY version of Asterisk I've used.
_______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
