Hi All;
My Asterisk is behind NAT with IP Address 192.168.0.2. I configued on my
iPlanet router and port forwarding for 5060 (UDP) to be forwarded for
192.168.0.2 and I was able to let the fring softphone (SIP) to register on the
asterisk.
But when caller initiate call, the caller hear the destination but the
destination does not hear the caller.
I checked the RTP port range and I found it (10000 - 20000) and I forwarded it
for the internal IP address 192.168.0.2 but the problem stayed!!
I do not know what should I do more? What it could be the reason for the
problem? What should I do on the router more?
I am also thinking if the fring software could use UDP ports other than the
range setted in the rtp.conf? Is it possible that source to use different port
than the Asterisk RTP ports?
Note: do I have to do port forwarding on my router for the RTP UDP ports, or it
is enough to forward the 5060 UDP port for the internal IP address 192.168.0.2?
Any help?
Regards
Bilal
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
