On Sun, Jun 29, 2008 at 7:02 PM, Sherwood McGowan <[EMAIL PROTECTED]> wrote: > Sherwood McGowan wrote: >> Gentlemen, >> I'm using 1.4.21 SVN Tag, and have the queues set up to use Realtime. >> This system works fine with 1.2.28, and everything loads fine with no >> errors, but when I log an agent in I see the extra message "(not in >> use)" by their listing and they are not rang by asterisk when their >> queue is called. >> >> Any ideas? >> > Nobody else? >
Have you checked call-limit and state information for SIP peers? That was changed between 1.2 and 1.4, and could affect queue state. See the UPGRADE notes. Otherwise You'll have to set "core set debug 2" and "core set verbose 3", and post full log (debug+verbose) where agents got logged in (if you have also realtime members, just execute "queue show xxxx" on CLI. Then you'll have to give one call to agent, talk for little and disconnect. Then just post that log here. Regards, Atis -- Atis Lezdins, VoIP Project Manager / Developer, [EMAIL PROTECTED] Skype: atis.lezdins Cell Phone: +371 28806004 Cell Phone: +1 800 7300689 Work phone: +1 800 7502835 _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users