Hi all, i'm trouble with codec setup on an asterisk machine 1.4.18 and some Thomson ST2030 as extensions.
In the users.conf file for internal extension i have: disallow=all allow=g729 allow=alaw allow=ulaw Without any codec installed (i mean with original g729 of asterisk) all go fine, calling from an extension to one other: Peer User/ANR Call ID Seq (Tx/Rx) Format Hold Last Message 10.9.9.9 202 11a6323d2ff 00102/00000 0x100 (g729) No Tx: ACK 10.9.9.10 201 a8749-c0a80 00101/00001 0x100 (g729) No Rx: ACK Installing the open source binary of g279 (codec_g729.so in modules dir) and restarting asterisk, the same call require transcoding: Peer User/ANR Call ID Seq (Tx/Rx) Format Hold Last Message 10.9.9.9 202 1992c2d149e 00102/00000 0x8 (alaw) No Tx: ACK 10.9.9.10 201 140a6d-c0a8 00101/00001 0x100 (g729) No Rx: ACK The CALLED extension uses alaw instead of g729. This uses a lot of CPU (up to 10% in my P3 machine). Where is the trouble? Asterisk bug? Thomson do not recognize g729 GPL as standard g729? I must set the framebuffer size? If i set ONLY g729 as allowed codec all go fine: all calls uses the g729 codec. Why codec negotian in the allow= list is not respected? Depends on codec binary? It's strange... Thanks to all... --- PicoStreamer - the real WEB live streaming software vinz486.com _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users