We are in the process of preparing to move our Asterisk server to a Digital T1 interface card instead of a analog card (via an Adtran which is now connected to the T1). I did a preliminary test the other day and hooked the T1 line up to the T1 card, bypassing the Adtran. This worked rather well I must say. The two issues I ran into are:
1) Caller ID is not working even though I enabled it. I simply do not see _anything_ related to caller ID going on. (not major, I am not even sure the phone company has it setup properly so I need to talk to them first, Verizon) 2) Asterisk is not detecting the far end hangup. Through the Adtran it does, but direct digital it does not. I bridged an incoming call to an analog phone and listened as I hung up the far end (cell-call). I hear a audible "click", silence, and then after maybe a half second I hear dialtone. I tried turning on hanguponpolarity switch, tried turning it off, tried turning callprogress on and off, still does not detect the hangup. Am I missing something obvious in Asterisk (this is my first digital hookup)? I read somewhere that Asterisk is already suppose to detect dialtone to know that the far-end hungup. Do I need to call my phone company and get details on exactly how they are triggering the hangup, though I would think with digital it "just happens"). Daniel _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
