Hi Matt, It is only cell phone calls. We have two POTS lines coming in. I am using TDM400 digium card. This is my zapta.conf. Looks like i'm using signalling fxs_ks is this right?
Thanks for your help. Kate ; ; Zapata telephony interface ; ; Configuration file [trunkgroups] [channels] language=en context=from-zaptel signalling=fxs_ks rxwink=300 ; Atlas seems to use long (250ms) winks ; ; Whether or not to do distinctive ring detection on FXO lines ; ;usedistinctiveringdetection=yes usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=no ;echotraining=800 rxgain=10.0 txgain=0.0 group=0 callgroup=1 pickupgroup=1 immediate=no ;faxdetect=both faxdetect=incoming ;faxdetect=outgoing ;faxdetect=no ;Include genzaptelconf configs #include zapata-auto.conf group=1 ;Include AMP configs #include zapata_additional.conf Matt Watson wrote: > is it only cell phone calls that don't work? or is it any external > call coming in over your lines? > > What type of inbound lines do you have? I;m guessing analog lines... > if thats the case what type of signalling are you using? > > if its only cell calls and not all external calls then I have no idea > what it'd be... but if its all calls then its probably a signalling > problem... you might be using loop start when you should be using > kewlstart... or it might be that you need to get disconnect > supervision added to your lines (essentially converting loop start -> > kewl start) > > -- > Matt > http://www.mattgwatson.ca > > > On Wed, Jul 9, 2008 at 3:08 AM, Giorgio Incantalupo > <[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>> > wrote: > > Hi Kate, > have you tried the busydetect parameter in zapata.conf? > Take a look here for other useful parameters: > http://www.voip-info.org/wiki-Asterisk+config+zapata.conf > > Giorgio. > > > Lists wrote: > > Hi all, > > > > When I do a test call into the box (which is running latest > version of > > Trixbox) it all goes fine. If i decide to hangup the cellphone > (during > > the ivr playing options) the system does not recognize the > hangup and > > the system continues through and ends up at the timeout option. > > > > What settings do I need to change to fix this. Is it the rxgain? > If so > > is there something i can use to figure out what the gains should > be set at? > > > > Thanks > > Kate > > > > _______________________________________________ > > -- Bandwidth and Colocation Provided by > http://www.api-digital.com -- > > > > AstriCon 2008 - September 22 - 25 Phoenix, Arizona > > Register Now: http://www.astricon.net > > > > asterisk-users mailing list > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > -- > > _________________________________________________ > Giorgio Incantalupo, mailto:[EMAIL PROTECTED] > <mailto:[EMAIL PROTECTED]> > FG&A srl - http://www.fgasoftware.com - > [EMAIL PROTECTED] - The Agile PBX http://www.voiceatwork.eu > Tel: 02997663.14, Fax: 0291390172 > > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > AstriCon 2008 - September 22 - 25 Phoenix, Arizona > Register Now: http://www.astricon.net > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > ------------------------------------------------------------------------ > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > AstriCon 2008 - September 22 - 25 Phoenix, Arizona > Register Now: http://www.astricon.net > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
