Thank you, yes, I changed the PCI Slot and it's the same, I get a used card from a customer with 2 FXO, same REV, that board was working on the customer server, put it on mine, and stop working. I put my board on his server and the board is working perfectly.
I had not test outgoing calls on that board, I tried and outgoing works fine. 2008/7/15 Noah Miller <[EMAIL PROTECTED]>: > Hi Jose - > > > After an upgrade from asterisk 1.2.13 to 1.2.25 including upgrading > libpri, > > zaptel, the incoming calls to a TDM400P REV I, with 3 FXO modules stop > > working. > > > > The board is working, I tested in another server with the 1.2.13 asterisk > > version. > > Also changed the pci slot where the board is. > > Hmm. Bad or incompatible PCI slot? Can you (at least for testing > purposes) switch back to the original PCI slot you were using when the > card worked? > > > - Noah > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > AstriCon 2008 - September 22 - 25 Phoenix, Arizona > Register Now: http://www.astricon.net > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > -- Jose Flores Galicia <<[EMAIL PROTECTED]>> BriefCode && Code Based Training
_______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
