James Mutuku wrote:
> Hi list,
>
> Have installed trixbox and I am working with a fxo gateway to get fxo
> calls to trixbox. I am using sip to send the calls from the gateway to
> trixbox. I have an extension 3000 on trixbox
>
> on [from-sip-external] on extensions.conf ,I have put the dial plan below.
>
> exten => 3000,1,dial(sip/3000)
> exten=> 3000,2,answer()
> exten => 3000,3,congestion()
> exten=> 3000,4,hangup()
>
>
> this works fine. But I when I put it in the form
>
> exten => _3XXX,1,dial(sip/${EXTEN})
> exten=> _3XXX,2,answer()
> exten =>_3XXX,3,congestion()
> exten=> _3XXX,4,hangup()
>
> the call goes into congestion and I get a busy tone. What could I be
> doing wrong?
>
> James
>
As a sanity check, you may want to place a NoOp(${EXTEN}) prior to the dial. If
you set the verbosity high on the Asterisk console, then you can see what the
value of EXTEN is when the NoOp occurs.
Mark Michelson
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
AstriCon 2008 - September 22 - 25 Phoenix, Arizona
Register Now: http://www.astricon.net
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
