Ricardo Melendez wrote: > > Hi to All, I have a PBX (MAINPBX) from a Telecomm Provider, which have > the feature to transfer calls (Incoming call -> Answer -> FLASH -> > Dial Number to transfer -> Answer -> FLASH+4) and the call is > transferred, but I have the need to implement an internal ACD using > Asterisk as the PBX, the trunks connected to my Asterisk FXO ports are > Extensions of my MAINPBX (ex., 5437, 5440 etc), all features work > fine, but I have the need to make asterisk act as a normal telephone > when transferring calls, I need to release the line (FXO port in my > Asterisk) and make the transfer via the MAINPBX feature. > > Otherwise I will use 2 lines of my Asterisk PBX to make the transfer > and it reduce the incoming lines available for my ACD. > > It’s possible send the commands FLASH, FLASH+4 using the incoming line > to my MAINPBX via Asterisk like a normal telephone? > > Thanks in Advance. > > > Ricardo Melendez > I have used the FLASH command in Asterisk to generate flashes...is that what you are asking?
later, PaulH Asterisk says: *CLI> show application Flash -= Info about application 'Flash' =- [Synopsis] Flashes a Zap Trunk [Description] Performs a flash on a zap trunk. This can be used to access features provided on an incoming analogue circuit such as conference and call waiting. Use with SendDTMF() to perform external transfers _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
