Your using a Linksys right? you can use the fxo port and send DTMF. Chris Bagnall wrote: > Greetings list, > > We have a client with an analogue door intercom/opening unit which we're > attempting to replace with an IP variant. The existing unit has the following > functionality: > > 1) Intercom - visitor hits "call", talks to operator > 2) Door opening - operator can open the door by dialling a 4-digit PIN > followed by * (the door unit interprets the DTMF tones) > 3) Door opening - the door unit has a numeric keypad to enable approved > persons to enter by entering the 4-digit PIN on the keypad > > We've tried getting the existing unit working with an ATA, but it's only > about 50% reliable (hangup not always detected, DTMF not always detected, > etc.), so it's probably time to look at fully IP alternatives. > > Any suggestions gratefully appreciated. > > Regards, > > Chris > > > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > AstriCon 2008 - September 22 - 25 Phoenix, Arizona > Register Now: http://www.astricon.net > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
-- Thank you and have any kind of day you want, Anthony Francis Rockynet VOIP (303) 444-7052 opt 2 [EMAIL PROTECTED] _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
