Could you explain further?
On Thu, Jul 24, 2008 at 4:13 AM, Gregory Malsack <[EMAIL PROTECTED]> wrote: > I resolved this problem. The key was to get the right combination of > self/callee and peer/caller. Read the instructions regarding the application > map very closely. My problem was that I was not running the StopMixMonitor > command against the proper channel. Even though mixmonitor records both > channels simultaneously, the recording is only assigned to 1 channel and you > have to run the command against the originating channel of the call. > > Greg > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Gregory Malsack > Sent: Wednesday, July 23, 2008 2:13 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [asterisk-users] Call Recordings... > > I'm getting close. The idea is based on the same principal as the link below. > Here's what I have done thus far: > > All calls are recorded via mixmonitor. This is part of the initial dialplan > when the call comes in. > I then created an application map key sequence that is supposed to run > stopmixmonitor. However I am unable to locate examples of syntax on that > command. Here is what I have: > > stoprecording => *8,self/callee,StopMixMonitor, > > This command syntax does not work and the recording continues on. Can anyone > provide direction on this? > > Thanks, > Gregory Malsack > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Anselm Martin > Hoffmeister > Sent: Tuesday, July 22, 2008 4:24 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [asterisk-users] Call Recordings... > > Am Dienstag, den 22.07.2008, 14:53 -0500 schrieb Gregory Malsack: >> Hello, >> >> >> >> My boss is asking me to setup the asterisk server to record all calls. >> (Simple). However, he wants to be able to enter a key sequence during >> the call to stop the recording. Any ideas on how I would do that? > > Hi Gregory, > > I found something about recording at > http://www.voip-info.org/wiki/view/Asterisk+config+features.conf > > (second example). If you combine that with a default_recording_enabled > (Monitor() call before Dial(), I would expect), that could be used to turn > _off_ recording by pressing a key. > > I would not know though how to protect against the external call party > pressing the same key. > > Best regards > > Anselm > > > No virus found in this incoming message. > Checked by AVG. > Version: 7.5.524 / Virus Database: 270.5.5/1568 - Release Date: 7/23/2008 > 6:55 AM > > > > No virus found in this outgoing message. > Checked by AVG. > Version: 7.5.524 / Virus Database: 270.5.5/1568 - Release Date: 7/23/2008 > 6:55 AM > > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > AstriCon 2008 - September 22 - 25 Phoenix, Arizona > Register Now: http://www.astricon.net > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > No virus found in this incoming message. > Checked by AVG. > Version: 7.5.524 / Virus Database: 270.5.5/1568 - Release Date: 7/23/2008 > 6:55 AM > > > No virus found in this outgoing message. > Checked by AVG. > Version: 7.5.524 / Virus Database: 270.5.5/1568 - Release Date: 7/23/2008 > 6:55 AM > > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > AstriCon 2008 - September 22 - 25 Phoenix, Arizona > Register Now: http://www.astricon.net > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
