This time, I am trying to remotely install Asterisk in China. I was told that an E1 line has been installed and so I plug it into port 1 of a TE412P.
On the box, first of all, I just installed Zaptel 1.4.10.1. # service zaptel restart Unloading zaptel hardware drivers:ERROR: Module zaptel is in use . Loading zaptel framework: [ OK ] Waiting for zap to come online...OK Loading zaptel hardware modules: tor2. wct4xxp. wcte12xp. wct1xxp. wcte11xp. wctdm24xxp. wcfxo. wctdm. wcusb. Running ztcfg: [ OK ] # vi zaptel.conf [...] span=1,1,0,ccs,hdb3,crc4 bchan=1-15,17-31 dchan=16 *** However, I received a red alarm in zttool and the LED on the TE412P card is also red. *** I have made sure that the jumper is closed for port 1 on the TE412P card and so it could not be the jumper problem. ### Because this is the first time I install Asterisk in China and I was wondering if their E1 is different from the Euro E1. ### However, I went into dmesg and I discovered the following. ### Could it really be a zaptel bug? I saw on a similar few on the digium bug list but I cannot be 100% sure. Any thoughts? About to enter spanconfig! Done with spanconfig! Registered tone zone 33 (China) About to enter startup! TE4XXP: Span 1 configured for CCS/HDB3/CRC4 timing source auto card 0! wct4xxp: Setting yellow alarm on span 1 timing source auto card 0! VPM400: Not Present VPM450: echo cancellation for 128 channels ******** ********BUG: soft lockup - CPU#2 stuck for 16s! [ztcfg:4681] ******** Pid: 4681, comm: ztcfg EIP: 0060:[<f8cba1df>] CPU: 2 EIP is at init_vpm450m+0x32d/0x34a [wct4xxp] EFLAGS: 00000286 Tainted: G (2.6.18-92.1.6.el5 #1) EAX: 00000000 EBX: f76ae8f0 ECX: 00000019 EDX: 0000ffff ESI: f7997400 EDI: 00000286 EBP: f76838c0 DS: 007b ES: 007b CR0: 8005003b CR2: b7f01007 CR3: 37bc1000 CR4: 000006d0 [<f8ca1b11>] t4_vpm450_init+0x18ce/0x198c [wct4xxp] [<f8ca5ee4>] t4_startup+0x4315/0x43c7 [wct4xxp] [<c042609c>] release_console_sem+0x17e/0x1b8 [<c046d53a>] cache_alloc_refill+0x14b/0x450 [<f8956f61>] zt_ioctl+0x273/0x144f [zaptel] [<c04d7d45>] generic_make_request+0x248/0x258 [<c045ae3c>] __do_page_cache_readahead+0x69/0x1c6 [<c0484a5b>] __d_lookup+0x98/0xdb [<c047c110>] do_lookup+0x53/0x166 [<c047e7e4>] do_path_lookup+0x20e/0x25e [<c047c389>] permission+0xa2/0xb5 [<c04e2d06>] kobject_get+0xf/0x13 [<c046f7fa>] __dentry_open+0xea/0x1ab [<c046f91f>] nameidata_to_filp+0x19/0x28 [<c046f959>] do_filp_open+0x2b/0x31 [<c048029b>] do_ioctl+0x47/0x5d [<c04804fb>] vfs_ioctl+0x24a/0x25c [<c0471bbe>] __fput+0x13f/0x167 [<c0480555>] sys_ioctl+0x48/0x5f [<c0404eff>] syscall_call+0x7/0xb ======================= VPM450: hardware DTMF disabled. VPM450: Present and operational servicing 4 span(s) Completed startup! _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
