Try this:
[local]
exten => _00165011091[45][0-9],1,NoOp(I AM HERE)
exten => _00165011091[45][0-9],n,Macro(setcli)
exten => _00165011091[45][0-9],n,Dial(SIP/${EXTEN:[EMAIL PROTECTED])
exten => _00165011091[45][0-9],n,Hangup
The "[" before "0-9]" is needed.
Felippe Silvestre
________________________________
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Adrian
Marsh
Sent: Thursday, August 07, 2008 07:46
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] problem controlling dialplan order
Hi All,
On a 1.4.15 system, I've a context as below, where I need to
catch some specific US ranges and dial direct via SIP rather than a PSTN
trunk. But the logic always goes via the International Trunk and I cant
see why...
[local]
exten => _00165011091[45]0-9],1,NoOp(I AM HERE)
exten => _00165011091[45]0-9],n,Macro(setcli)
exten =>
_00165011091[45]0-9],n,Dial(SIP/${EXTEN:[EMAIL PROTECTED])
exten => _00165011091[45]0-9],n,Hangup
..... (same context)
Catch local (UK) numbers
exten => _0[1-9]X.,1,NoOp(Dialling UK number)
exten => _0[1-9]X.,n,Macro(setcli)
exten => _0[1-9]X.,n(jumpdial),Dial(SIP/+44${EXTEN:[EMAIL PROTECTED])
exten => _0[1-9]X.,jumpdial+101,Dial(${TRUNK}/${EXTEN},,Wr)
exten => _0[1-9]X.,n+101,Busy
;Catch any (00xx) numbers
exten => _00X.,1,NoOp(Dialling International number)
exten => _00X.,n,Macro(setcli)
exten => _00X.,n(jumpdial),Dial(SIP/+${EXTEN:[EMAIL PROTECTED])
exten => _00X.,jumpdial+101,Dial(${TRUNK}/${EXTEN},,Wr)
exten => _00X.,n+101,Busy
I've tried putting the Catch codes above into a sub-context, and
then put an include into the [local], but it still dials via the Catch
international...
The odd thing is that in either, the show dialplan seems to
suggest the correct order :
'_00165011091[45]0-9]' => 1. NoOp(I AM HERE)
[pbx_config]
2. Macro(setcli)
[pbx_config]
3. Dial(SIP/${EXTEN:[EMAIL PROTECTED])
[pbx_config]
4. Hangup()
[pbx_config]
.... (some others)
'_00X.' => 1. NoOp(Dialling International number)
[pbx_config]
2. Macro(setcli)
[pbx_config]
[jumpdial] 3. Dial(SIP/+${EXTEN:[EMAIL PROTECTED])
[pbx_config]
104. Dial(${TRUNK}/${EXTEN}||Wr)
[pbx_config]
206. Busy()
[pbx_config]
The page at voip-info isn't too clear in the differences between
1.2 and 1.4
(http://www.voip-info.org/wiki/view/Asterisk+config+extensions.conf+sort
ing) so I'm not sure where I've gone wrong.
Adrian Marsh
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
AstriCon 2008 - September 22 - 25 Phoenix, Arizona
Register Now: http://www.astricon.net
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
