Nhadie wrote: > I disabled logging of NOTIFY on the CLI and it does not show anymore, > however CPU is still very high, latency as well goes up when it is > trying to poke my phone here, my phone(SPA942) also keeps on rebooting > > is there a way to increase the time of sending the qualify? TIA > you can try to use 'qualifyfreq' parametr in sip.conf (if you are using 1.6 or trunk)
> regards > nhadie > > Nhadie wrote: > >> Thank you for your reply sir. I tried setting qualify=yes my CPU spiked >> to 113% >> >> i continuously see this on my CLI> >> >> Aug 11 23:31:56] NOTICE[15207]: chan_sip.c:12669 >> handle_response_peerpoke: Peer '118555' is now Reachable. (388ms / 2000ms) >> [Aug 11 23:31:56] NOTICE[15207]: chan_sip.c:12669 >> handle_response_peerpoke: Peer '110100' is now Lagged. (2354ms / 2000ms) >> [Aug 11 23:31:56] NOTICE[15207]: chan_sip.c:12669 >> handle_response_peerpoke: Peer '118777' is now Reachable. (432ms / 2000ms) >> [Aug 11 23:31:56] NOTICE[15207]: chan_sip.c:12669 >> handle_response_peerpoke: Peer '118777' is now Reachable. (436ms / 2000ms) >> [Aug 11 23:31:56] NOTICE[15207]: chan_sip.c:12669 >> handle_response_peerpoke: Peer '118555' is now Reachable. (440ms / 2000ms) >> [Aug 11 23:31:56] NOTICE[15207]: chan_sip.c:12669 >> handle_response_peerpoke: Peer '118555' is now Reachable. (444ms / 2000ms) >> >> could that be the cause of high cpu? i'm logged in on the cli asterisk >> -vr, my verbosity is only set to 1. how come i keep on seeing the NOTICE? >> >> thanks again in advanced >> >> regards, >> nhadie >> >> >> Rob Hillis wrote: >> >>> If a phone is unplugged, it's not likely to have time to send >>> notification of this to Asterisk before it powers off. There's nothing >>> you can add to your dialplan to overcome this, however you *can* set the >>> "qualify" parameter within sip.conf (or it's equivalent realtime table) >>> to overcome this. >>> >>> See http://www.voip-info.org/wiki/view/Asterisk+sip+qualify for more >>> information. Short version is that configuring a qualify interval is >>> the equivalent of setting up a heartbeat between Asterisk and registered >>> devices configured with a qualify interval. If the heartbeat fails, the >>> phone's registration is suspended. >>> >>> Nhadie wrote: >>> >>>> Hi, >>>> >>>> I'm running asterisk realtime, i had prob when a user does not >>>> unregister properly. >>>> >>>> I tested with SPA942 and a PAP2, when phone is registered, i call using >>>> the SPA using x-lite no problem, but when i unplugged the power, it does >>>> not unregister properly, so asterisk think SPA942 is still registered, >>>> when i call using x-lite, asterisk tries to call it.so it gets stuck at >>>> >>>> [Aug 11 21:37:31] -- Called 102104 >>>> >>>> until it reached the timed out i set in the dialplan which is 30 secs >>>> >>>> Dial(SIP/${EXTEN}|30|t|M(setmusiconhold,moh-${EXTEN})) >>>> >>>> is there something i can add on my dialplan to first detect that the >>>> user is not available, or maybe force unregister, anything that would >>>> not make my dialplan to wait for 30 secs. >>>> >>>> also i'm not using rtcachefriends, how would i know in the CLI which >>>> user is registered? i tried sip prune but it shows me nothing >>>> >>>> sip prune realtime peer all >>>> No peers found to prune. >>>> >>>> anyone experienced this? >>>> >>>> thank you >>>> >>>> regards. >>>> nhadie >>>> >>>> _______________________________________________ >>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>>> >>>> AstriCon 2008 - September 22 - 25 Phoenix, Arizona >>>> Register Now: http://www.astricon.net >>>> >>>> asterisk-users mailing list >>>> To UNSUBSCRIBE or update options visit: >>>> http://lists.digium.com/mailman/listinfo/asterisk-users >>>> >>>> !DSPAM:48a0464541521298081403! >>>> >>>> >>>> >>>> >>> _______________________________________________ >>> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>> >>> AstriCon 2008 - September 22 - 25 Phoenix, Arizona >>> Register Now: http://www.astricon.net >>> >>> asterisk-users mailing list >>> To UNSUBSCRIBE or update options visit: >>> http://lists.digium.com/mailman/listinfo/asterisk-users >>> >>> >>> >> _______________________________________________ >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> >> AstriCon 2008 - September 22 - 25 Phoenix, Arizona >> Register Now: http://www.astricon.net >> >> asterisk-users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> >> >> > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > AstriCon 2008 - September 22 - 25 Phoenix, Arizona > Register Now: http://www.astricon.net > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
