Anton Yurchenko wrote:
Pavel Litvinenko wrote:
Anton Yurchenko wrote:I had booted it this morning and only had like 10 calls today. The firmware is:
... bug in firmware - I have almost fixed that by upgrading image (now this problem rises once per week with ~100 calls from this device per day )
Hello,
I`m try to make the attended transfer work Dlink DG-104S via FLASH, when somebody calls my phone I pickup and press flash to get a second line to call another extension. When I press flash I hear no dialtone, and only a long and then small beep. When I try to dial digits I hear again those long+short beeps, but the extension dialed is not ringing. If I pres flash again I get back to the previous caller. On the console I see those digits that I dial after pressing flash. What is wrong? here is my mgcp.conf and exept from the console about this call.
what firmware is running on your dg104 ? did you try reload dlink ?
Boot PROM Version 3.0B14-C
Firmware Version 3.0B35-C
Boot PROM Version 3.0B22-D Firmware Version 3.0B44-D
ftp://ftp.dlink.ru/pub/VoIP/DG-104S/Firmware/MGCPDG104.zip
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
