Just cross pairs 1-2 and 4-5 1 <--> 4 2 <--> 5
Never done an E1, but I think it's the same for a T1 4 wire cable. Tim Thompson Commercial Sales Engineer http://www.amatechtel.com (806) 722-2227 -----Original Message----- From: bam [mailto:[EMAIL PROTECTED] Sent: Monday, December 29, 2003 9:12 AM To: [EMAIL PROTECTED] Subject: [Asterisk-Users] E100P pinouts anyone? I'm trying to hookup an E100P to an E1 PRI that I know is working, it drives an Ascend Max happily. The E100P has a red LED flashing away slowly and the telco switch reports that there is no level one signalling link. So that I can rule out the obvious things does anyone have the pinouts for the RJ45 on the E100P? I've tried straight through and crossover to no avail. I get a couple of errors on modprobing the driver, but if I reverse the order it seems to load OK. ztcfg is happy and zttool seems to see the card so I'm pretty certain it is something silly. any help gratefully received. Brian [EMAIL PROTECTED] root]# modprobe zaptel [EMAIL PROTECTED] root]# modprobe wct1xxp ZT_CHANCONFIG failed on channel 32: No such device or address (6) /lib/modules/2.4.20-24.9/misc/wct1xxp.o: post-install wct1xxp failed /lib/modules/2.4.20-24.9/misc/wct1xxp.o: insmod wct1xxp failed [EMAIL PROTECTED] root]# modprobe wcfxs [EMAIL PROTECTED] root]# modprobe wct1xxp [EMAIL PROTECTED] root]# _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
