If you have a 24 channel bank you don't use pri_cpe remove that line. channe => 1-24 signalling=fxo_ks
Thats all you need. On Mon, 29 Dec 2003 [EMAIL PROTECTED] wrote: > In my zapata.conf file I have: > channel => 1-23 > signalling=pri_cpe > signalling=fxo_ks > > > I have a 24 channel channelbank on the inside and a pri coming from > Verizon on the outside. All previously worked fine with my zaptel.conf > file and zapata.conf file. > > > On Mon, 29 Dec 2003, Tim Thompson wrote: > > > It has to do w/ your /etc/asterisk/Zapata.conf file. > > > > We need to know what your T1 configuration is. > > > > 24 FXS ports > > 12 FXO Ports/12 FXS > > > > and also it matters in what order. > > > > > > > > > > Tim Thompson > > Commercial Sales Engineer > > http://www.amatechtel.com > > (806) 722-2227 > > > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] > > Sent: Monday, December 29, 2003 8:56 AM > > To: [EMAIL PROTECTED] > > Subject: Re: [Asterisk-Users] asterisk crash > > > > The only things uncommented in my /etc/zaptel.conf file are as follows: > > span=1,1,0,esf,b8zs > > span=2,0,0,esf,b8zs > > loadzone=us > > defaultzone=us > > > > > > > > > > > > On Mon, 29 Dec 2003, zoa wrote: > > > > > try running ztcfg first > > > > > > > > > > > > > > > At 09:26 29/12/2003 -0500, you wrote: > > > >Hello all > > > >I just checked out the latest > > > >zaptel/zapata/libpri/asterisk/asterisk-addons from the cvs and ran > > through > > > >the entire make procedures. Everything seemed to go fine however now > > when > > > >I attempt to start asterisk, it says ok but it seems to be > > immediately > > > >crashing. The following messages are displayed in my > > > >/var/log/asterisk/messages file for the time right around the crash: > > > >Dec 29 10:09:37 WARNING[1074395872]: File chan_zap.c, Line 7341 > > > >(setup_zap): Ignoring rxwink > > > >Dec 29 10:09:37 ERROR[1074395872]: File chan_zap.c, Line 5159 > > (mkintf): > > > >Unable to get span status: Inappropriate ioctl for device > > > >Dec 29 10:09:37 ERROR[1074395872]: File chan_zap.c, Line 7081 > > (setup_zap): > > > >Unable to register channel '1-23' > > > >Dec 29 10:09:37 WARNING[1074395872]: File loader.c, Line 312 > > > >(ast_load_resource): chan_zap.so: load_module failed, returning -1 > > > > > > > >Does anyone have any insight on this? Everything compiled fine and > > was > > > >working fine with my previous version of asterisk. > > > >Thanks > > > >AJ > > > > > > > > > > > >_______________________________________________ > > > >Asterisk-Users mailing list > > > >[EMAIL PROTECTED] > > > >http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > _______________________________________________ > > > Asterisk-Users mailing list > > > [EMAIL PROTECTED] > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > _______________________________________________ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users