Adam Goryachev wrote:
I might add that I has similar problems on a very frequant basis,
finally I 'accidentally' found a version of asterisk + zaptel modules
that was stable for more than 6 weeks. Eventually I asked for (and got)
a replacement card from digium with the internal power connector. This
worked fine with the same software versions, although it crashed once
after about 3 weeks.

I've just updated to current CVS of everything, and will see how it
goes.

I'm not doing anything major out of the ordinary, I have a single X101P,
a single TDM400P and a 2 channel (single BRI) i4l ISDN card. I use IAX
to connect to a *very* lightly used extension (ie, iax to second
asterisk to sip ata186).

Regards,
Adam


Since updating my 2 TDM400P's, with 4 channels each, to REV E/F, I have seen very intermittant loss of dialtone on some channels, one hard lookup that required a power reset and a "Power alarm on module 1, resetting!", which oddly occurred in the small hours of the morning, when the phone was not being used, over a +_ 2 month period, where the first card has had regular daily office use and the second card virtually none.


The machine is a 2.4GHz P4 on an ASUS Intel chipset MB, running a stripped down Redhat 7.3 with a custom kernel compiled completely with asterisk requirements only. Everything not required for asterisk (USB, serial, parallel, mouse) has been disabled in the BIOS and there is no X or framebuffer installed. Two X101Ps are also in use.

/proc/interrupts

           CPU0
  0:  456297846          XT-PIC  timer
  1:          2          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  5:  267137019          XT-PIC  wcfxo
  7:   16745155          XT-PIC  eth0
  8:          1          XT-PIC  rtc
  9:  267049399          XT-PIC  wcfxo
 11:  267335750          XT-PIC  wcfxs
 12: 3313776049          XT-PIC  wcfxs
 14:    1912794          XT-PIC  ide0
NMI:          0
LOC:  456293550
ERR:          0
MIS:          0

I would be interested in hearing from anyone else running 2 x X101 and 2 x TDM400 4 channels, who is having no problems at all.

Regards,

Richard



_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to