Do a 'make menuselect' when you install zaptel driver and make sure in the 'Binary Firmware Package' either ' FIRMWARE-OCT6114-064' or ' FIRMWARE-OCT6114-128' is selected depending on which echo cancellation module you have. If you are unsure select both.
Remi Klaverstyn, David C wrote: > > Hi All, > > > > When using a Digium card with a hardware echo cancellation module > installed, is the only thing required to enable it, is to set > echocancel=yes in zapata.conf? > > > > I think I remember seeing somewhere that you need to make a change in > the zaptel Makefile to allow the echo cancellation to work. Is that > correct and if so what is it? > > > > Regards > > David. > > ------------------------------------------------------------------------ > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > AstriCon 2008 - September 22 - 25 Phoenix, Arizona > Register Now: http://www.astricon.net > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
