SCCP (aka Skinny), H323, MGCP, and SIP all use the RTP protocol for audio. For all signalling protocols (except maybe H323) use rtp.conf for the RTP ports.
OCG Technical Support wrote: > > > I have a 7921 wireless phone working with Asterisk, and I want to > tighten the wide open port range of my IPTABLES now. > > > > I tried allowing only SCCP port (2000) in/out and found that my audio > was gone. A quick look at my iptables message shows source port 15886 > and dest port 25968 used: > > FORWARD - Drop: IN=eth1 OUT=eth2 SRC=172.31.253.4 DST=172.31.254.102 > LEN=200 TOS=0x18 PREC=0xA0 TTL=63 ID=0 DF PROTO=UDP SPT=15886 DPT=25968 > LEN=180 > > > > Can anyone tell my > > > > 1. which port range I have to open for the audio stream? > > 2. Is there a way to force SCCP and the phone to use a different > port range for audio? > > > > Thanks > > MD > > > ------------------------------------------------------------------------ > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > AstriCon 2008 - September 22 - 25 Phoenix, Arizona > Register Now: http://www.astricon.net > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > -- Consulting for Asterisk, Polycom, Sangoma, Digium, Cisco, LAN, WAN, QoS, T-1, PRI, Frame Relay, Linux, and network design. Based near Birmingham, AL. Now accepting clients worldwide. _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
