On Thu, Sep 18, 2008 at 01:09:38PM -0400, Jason T. Nelson wrote:
> I have an Ubuntu 8 server running Asterisk 1.4 with three interface cards in
> it:
>
> * Wildcard TDM400P
> * Wildcard TDM410P
> * Wildcard TE122
>
> I'm using zaptel 1.4.11, and the difficulty I'm running into is that
> with EVERY reboot, the order in which the hardware appears changes. This
> makes ztscan cough up a different order for the spans, which makes it nearly
> impossible to use the Digium GUI as after reboots, it complains that the
> hardware has changed. Is there a way to lock down probe order on boot, or
> somehow write zaptel.conf in such a way that port and span assignments never
> change between reboots?
Those cards use each a different driver. Write those driver, in your
preffered order, in /etc/modules .
--
Tzafrir Cohen
icq#16849755 jabber:[EMAIL PROTECTED]
+972-50-7952406 mailto:[EMAIL PROTECTED]
http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
AstriCon 2008 - September 22 - 25 Phoenix, Arizona
Register Now: http://www.astricon.net
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
