As a followup to my previous email, change nat_enable to "1" and reboot the phones.
Jerry Geis wrote: >> Did you check sip.conf to make sure that the port is correctly set to 5060? >> >> Please show the output of Cli> sip show peer <peernumber> and the contents >> of your SEP<MAC>.cnf file. >> >> Dave >> > > sip.conf has : > > bindport=5060 ; UDP Port to bind to (SIP standard port > is 5060) > bindaddr=X.X.X.X ; ress to bind to (0.0.0.0 binds to all) > srvlookup=yes ; Enable DNS SRV lookups on outbound calls > > > One extension cisco in sip.conf is: > [402] > type=friend > dtmfmode=rfc2833 > username=402 > secret=XXXXXXX > disallow=all > allow=ulaw > allow=alaw > host=dynamic > context=local-sip > nat=yes > canreinvite=no > callerid="John Smith" <402> > > sip show peer 402 > * Name : 402 > Secret : <Set> > MD5Secret : <Not set> > Context : smvoice-sip > Subscr.Cont. : <Not set> > Language : > > AMA flags : Unknown > CallingPres : Presentation Allowed, Not Screened > Callgroup : > Pickupgroup : > Mailbox : > VM Extension : asterisk > LastMsgsSent : 32767/65535 > Call limit : 0 > Dynamic : Yes > Callerid : "John Smith" <402> > Expire : -1 > Insecure : no > Nat : Always > ACL : No > CanReinvite : No > PromiscRedir : No > User=Phone : No > Trust RPID : No > Send RPID : No > DTMFmode : rfc2833 > LastMsg : 0 > ToHost : > Addr->IP : (Unspecified) Port 0 > Defaddr->IP : 0.0.0.0 Port 5060 > Def. Username: 402 > SIP Options : (none) > Codecs : 0xc (ulaw|alaw) > Codec Order : (ulaw,alaw) > Status : Unmonitored > Useragent : > Reg. Contact : > > > SIP Config file: > > # SIP Configuration Generic File (start) > > > # Proxy Server > proxy1_address: "X.X.X.X" > proxy2_address: "X.X.X.X" > proxy3_address: "X.X.X.X" > proxy4_address: "X.X.X.X" > proxy5_address: "X.X.X.X" > proxy6_address: "X.X.X.X" > > # Line 1 Settings > line1_name: "402" ; Line 1 Extension\User ID > line1_displayname: "402" ; Line 1 Display Name > line1_authname: "402" ; Line 1 Registration Authentication > line1_password: "402" ; Line 1 Registration Password > > # Line 2 Settings > line2_name: "403" ; Line 2 Extension\User ID > line2_displayname: "403" ; Line 2 Display Name > line2_authname: "403" ; Line 2 Registration Authentication > line2_password: "403" ; Line 2 Registration Password > > # Emergency Proxy info > proxy_emergency: "" > proxy_emergency_port: "5060" > > # Backup Proxy info > proxy_backup: "" > proxy_backup_port: "5060" > > # Outbound Proxy info > outbound_proxy: "" > outbound_proxy_port: "5060" > > # NAT/Firewall Traversal > nat_enable: "0" > nat_address: "" > voip_control_port: "5060" > start_media_port: "16384" > end_media_port: "32766" > nat_received_processing: "1" > > # Phone Label (Text desired to be displayed in upper right corner) > phone_label: "JDA 402 " ; Has no effect on SIP messaging > > # Time Zone phone will reside in > time_zone: EST > > # Telnet Level (enable or disable the ability to telnet into this phone > telnet_level: "0" ; 0-Disabled (default), 1-Enabled, 2-Privileged > > # Phone prompt/password for telnet/console session > phone_prompt: "Go Away" ; Telnet/Console Prompt > phone_password: "cisco" ; Telnet/Console Password > > proxy_register: 1 > > # Enable_VAD (1-enabled, 0-disabled) > enable_vad: "0" > > # Network Media Type (auto, full100, full10, half100, half10) > network_media_type: "auto" > user_info: phone > > # URL for external Directory location > #logo_url: "http://10.0.1.3/10-20logo.bmp"; ; URL for > branding logo to be used on phone display > > # SIP Configuration Generic File (stop) > > > > > > > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > AstriCon 2008 - September 22 - 25 Phoenix, Arizona > Register Now: http://www.astricon.net > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
![http://10.0.1.3/10-20logo.bmp"](http://10.0.1.3/10-20logo.bmp"){kind=link}