Hello Steve, On Mon, Oct 13, 2008 at 9:52 PM, Steve Totaro <[EMAIL PROTECTED]> wrote: > > If you are going to dismiss (the most probable) problem (NAT) without > posting configs, I am not sure how much help you will get, you will > probably be dismissed as well.
What particular configs are you looking for? Below is my current setup and scenario: [snom] ==LAN==> [asterisk] ==FXO/POTS ==> [analog_telephone/mobile_phone] SNOM is using the 192.168.101.102 IP address Asterisk is using 192.168.101.1 IP address for its eth1 interface FXO port is connected to the POTS SNOM doesn't need to go out to the Internet in this scenario, AFAIK. Below is my current NAT rules: # iptables -L -v -t nat Chain PREROUTING (policy ACCEPT 63795 packets, 7162K bytes) pkts bytes target prot opt in out source destination 11460 760K RETURN 0 -- any any 192.168.101.0/24 !192.168.101.0/24 Chain POSTROUTING (policy ACCEPT 570 packets, 41836 bytes) pkts bytes target prot opt in out source destination 11408 757K MASQUERADE 0 -- any eth0 192.168.101.0/24 anywhere Chain OUTPUT (policy ACCEPT 570 packets, 41836 bytes) pkts bytes target prot opt in out source destination Please advice if you need more information from me. Regards, GNUbie _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
