Quoting "Syed Nasruddin" <[EMAIL PROTECTED]>: > > How do we adjust zaptel and asterisk for CLI??. Is there some variable > to be set??.. kindly explain keeping in view your country settings this > will give me some hint.thanks
Bearing in mind that these settings are for UK BT (even on other providers here, it is different), in /etc/asterisk/zapata.conf, I enabled the following: distinctiveringaftercid=yes usecallerid=yes cidsignalling=v23 (bell and dtmf are also available - it all depends on what is used in your country and by the provider of your line) sendcalleridafter=2 (this is a UK setting - it may not be needed where you are) I also have callwaitingcallerid=yes, but not sure I have any workable use for it at present. calllerid=asreceived is applied to the FXO port (channel 4 on my card, 6 on yours it seems) As I say, these settings are not necessarily correct for other countries - in particular the signalling and need for sendcalleridafter may be different. Can you connect a caller ID display unit to the line and check that caller ID is presented? If it isn't, you will need to get that enabled too. There is one other problem I have found but it probably won't apply to other countries, so see if this gets you anywhere. -- Phil Reynolds mail: [EMAIL PROTECTED] Web: http://www.tinsleyviaduct.com/phil/ Waltham 66, Emley Moor 69, Droitwich 79, Windows 95 ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program. _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users