Hi Duncan, yes I have a tftp server (I use also Cisco 7941G that use tftp server for upload configuration) and I know this function, but now my problem is that the phone is stopped on the initial screen that show 'upgrading' and MAC address and the process not continued. Thanks.
------ Salvatore. ----- Original Message ----- From: "Duncan Turnbull" <[EMAIL PROTECTED]> To: "Asterisk Users Mailing List - Non-Commercial Discussion" <[email protected]> Sent: Tuesday, October 14, 2008 8:52 PM Subject: Re: [asterisk-users] Cisco 7906g & SIP > Hi Salvatore > > Do you have a TFTP server that serves the phone configuration files? > This is very separate to the phone, i.e. on a server/pc somewhere, and > will log all the file requests it receives. You can check this > irrespective of the phone > > Have you checked whether tftp requests are being made, usually they come > before the system goes into the upgrading state. > > I have had that before and it was caused by having different load files > from that specified in the OS79XX.TXT file which for my phones usually > have P003-08-6-00 but for upgrading I start from P0S30202 > > For SIPDefault.cnf you also need the image version to match > #Image Version > image_version:P0S3-08-6-00 ; > > But for conversion I first go to this image > image_version:P0S30202 ; > > And I go from that to this > > image_version:P0S3-06-2-00 ; > > then to the current version > > > And I have these files on my tftpserver which are the respective firmwares > > -rwxr-xr-x 1 root root 753560 2007-04-23 14:36 P0S3-08-6-00.sb2 > -rwxr-xr-x 1 root root 459 2007-04-23 14:36 P0S3-08-6-00.loads > -rwxr-xr-x 1 root root 130228 2007-04-23 14:36 P003-08-6-00.sbn > -rwxr-xr-x 1 root root 129824 2007-04-23 14:36 P003-08-6-00.bin > -rwxr-xr-x 1 root root 486974 2007-04-27 14:51 P0S3-06-2-00.sbn > -rwxr-xr-x 1 root root 486570 2007-04-27 14:51 P0S3-06-2-00.bin > -rwxr-xr-x 1 root root 392214 2007-04-27 14:51 P0S30202.bin > > I can't recall if I need all the 08-6 versions > > Cheers Duncan > > > Sasa wrote: >> Hi Duncan, >> I have tried more times to make the reset phone but is displays always >> and >> only 'upgrading' and MAC address and I cann't access the phone >> configuration. >> Thanks. >> >> ------ >> >> Salvatore. >> >> >> >> ----- Original Message ----- >> From: "Duncan Turnbull" <[EMAIL PROTECTED]> >> To: "Asterisk Users Mailing List - Non-Commercial Discussion" >> <[email protected]> >> Sent: Tuesday, October 14, 2008 11:41 AM >> Subject: Re: [asterisk-users] Cisco 7906g & SIP >> >> >>> Hi Salvatore >>> >>> You need to look at the logs of the tftp server, not the phone. >>> Hopefully you can see the ip address of the phone asking for files >>> >>> If there is nothing at all being requested from the tftp server then you >>> probably want to reset the phone to defaults again. >>> >>> Usually it stalls when you have some mismatches in the config files. But >>> it almost always asks for the default files. >>> >>> From the files requested you can determine whether its asking for SIP >>> or SCCP files, and if SIP which version of firmware for the phone >>> >>> Cheers Duncan >>> >>> Sasa wrote: >>>> Hi Dave, >>>> I don't view nothing in tftp server because the phone is stopped on >>>> start >>>> screen with displayed 'upgrading' and MAC address..I don't understand >>>> what >>>> happened after the reset. phone >>>> Regards. >>>> >>>> ------ >>>> >>>> Salvatore. >>>> >>>> >>>> >>>> ----- Original Message ----- >>>> From: "David Gibbons" <[EMAIL PROTECTED]> >>>> To: "Asterisk Users Mailing List - Non-Commercial Discussion" >>>> <[email protected]> >>>> Sent: Monday, October 13, 2008 4:29 PM >>>> Subject: Re: [asterisk-users] Cisco 7906g & SIP >>>> >>>> >>>>> Hi Salvatore, >>>>> >>>>> I'm talking about the tftp logs on the tftp server: >>>>> >>>>> Something like 'tail -f /var/log/tftp' or 'tail -f /var/log/messages' >>>>> should do the trick. >>>>> >>>>> Dave >>>>> >>>>> -----Original Message----- >>>>> From: [EMAIL PROTECTED] >>>>> [mailto:[EMAIL PROTECTED] On Behalf Of Sasa >>>>> Sent: Monday, October 13, 2008 9:57 AM >>>>> To: Asterisk Users Mailing List - Non-Commercial Discussion >>>>> Subject: Re: [asterisk-users] Cisco 7906g & SIP >>>>> >>>>> I cann't view phone log files because, after reboot, the phone is >>>>> stopped >>>>> on >>>>> this screen ( 'upgrading' with MAC address) ! >>>>> Regards. >>>>> >>>>> ------ >>>>> >>>>> Salvatore. >>>>> >>>>> >>>>> >>> _______________________________________________ >>> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>> >>> asterisk-users mailing list >>> To UNSUBSCRIBE or update options visit: >>> http://lists.digium.com/mailman/listinfo/asterisk-users >>> >> >> >> _______________________________________________ >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> >> asterisk-users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
