Dear All, I am trying to setup an ISDN line from local telco on a digium card. The problem I am facing is that I am not getting any caller id from the telco. They say that they have enabled caller id.
Please help me out. My zapata.conf -------------------------------------------------------------------------------------------------------------------- [trunkgroups] [channels] context=pstnincoming pridialplan=local prilocaldialplan=local usecallerid=yes cidsignalling=v23 cidstart=ring hidecallerid=no callwaiting=no usecallingpres=yes sendcalleridafter=1 echocancel=no echocancelwhenbridged=no rxgain=0.0 txgain=0.0 callgroup=1 pickupgroup=1 immediate=no callerid=asreceived busydetect=no busycount=6 callprogress=no faxdetect=incoming switchtype = national signalling = pri_cpe group = 1 channel => 1-15,17-31 channel => 32-46,48-62 -------------------------------------------------------------------------------------------------------------------- The information I get from using "pri intense debug span 1" is: -------------------------------------------------------------------------------------------------------------------- < [ 02 01 16 9c 08 02 15 01 05 04 03 80 90 a3 18 03 a1 83 81 70 08 c1 34 33 39 32 38 34 32 a1 ] < Informational frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 000 EA: 1 < N(S): 011 0: 0 < N(R): 078 P: 0 < 26 bytes of data Handling message for SAPI/TEI=0/0 -- ACKing all packets from 77 to (but not including) 78 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter < Protocol Discriminator: Q.931 (8) len=26 < Call Ref: len= 2 (reference 5377/0x1501) (Originator) < Message type: SETUP (5) < [04 03 80 90 a3] < Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Speech (0) < Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16) < User information layer 1: A-Law (35) < [18 03 a1 83 81] < Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Preferred Dchan: 0 < ChanSel: As indicated in following octets < Ext: 1 Coding: 0 Number Specified Channel Type: 3 < Ext: 1 Channel: 1 ] < [70 08 c1 34 33 39 32 38 34 32] < Called Number (len=10) [ Ext: 1 TON: Subscriber Number (4) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) '4392842' ] < [a1] < Sending Complete (len= 1) -- Making new call for cr 5377 -- Processing Q.931 Call Setup -- Processing IE 4 (cs0, Bearer Capability) -- Processing IE 24 (cs0, Channel Identification) -- Processing IE 112 (cs0, Called Party Number) -- Processing IE 161 (cs0, Sending Complete) q931.c:3509 q931_receive: call 5377 on channel 1 enters state 6 (Call Present) Sending Receiver Ready (12) -------------------------------------------------------------------------------------------------------------------- -- Regards, Nasir. _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
