Gordon Henderson wrote: > On Thu, 23 Oct 2008, Nhadie wrote: > >> hi, >> >> hs anyone able to make video to work on asterisk? i tried following this: >> >> http://www.voip-info.org/tiki-index.php?page=Asterisk+phone+xten+eyeBeam >> >> i can see that eyebeam is trying to broadcast a video but the other >> eyebeam is not receiving it. > > What's the other end? Grandstreams won't take H263p, so force > eyebeam/x-lite to only use H263, and just put this in as the codec in > sip.conf.
hi sir both sides using eyebeam, i also hardset codec to use basic H236. then i allowed the codec, allow=h236. i'm using Asterisk 1.4.21.2., could that be the reason? coz document says video on 1.4 is on infancy. > > I presume you've read this too: > > http://www.voip-info.org/wiki-Asterisk+video > >> i tested the same setup but this time using ser with rtpproxy and >> eyebeam video works fine. >> >> any ideas? where do you think should i start troubleshooting this? > > I'm using Video with asterisk version 1.2 and it's working very well > so-far. Using Grandsteam phones - done one test with an ATL phone and made > a few calls to someone using x-lite. Tring to get Ekiga to work, but I > can't get the codecs for my wifes Acer One notebook. > > Biggest problem is codec selection. Make sure both ends support the same > thing, and that asterisk can route it. > > Gordon > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
