Hi,
A newbie here trying to learn Asterisk. I've installed PiAF v.1.3(PBX in A
Flash) and trying to set up the TDM808E card as a test. For now I only have
one analog line. I went into the FreePBX interface and created a ZAP trunk
with 1 as the Zap Identifier.
When I try to call out, I get the error "CHANUNAVAIL" and the "All Circuits are
busy" message. If I try to call in, Asterisk doesn't pick up.
What am I doing wrong?? I been at this for days now and I don't see where the
issue is at!
TIA!
------------------------------
Output from Asterisk CLI
------------------------------
-- Executing [EMAIL PROTECTED]:19] Dial("SIP/5134-088a9c90",
"ZAP/1/7593548|300|") in new stack
== Everyone is busy/congested at this time (1:0/0/1)
-- Executing [EMAIL PROTECTED]:20] Goto("SIP/5134-088a9c90",
"s-CHANUNAVAIL|1") in new stack
-- Goto (macro-dialout-trunk,s-CHANUNAVAIL,1)
-- Executing [EMAIL PROTECTED]:1] GotoIf("SIP/5134-088a9c90", "1?noreport")
in new stack
-- Goto (macro-dialout-trunk,s-CHANUNAVAIL,3)
-- Executing [EMAIL PROTECTED]:3] NoOp("SIP/5134-088a9c90", "TRUNK Dial
failed due to CHANUNAVAIL (hangupcause: 0) - failing through to other trunks")
in new stack
-- Executing [EMAIL PROTECTED]:5] Macro("SIP/5134-088a9c90", "outisbusy|")
in new stack
-- Executing [EMAIL PROTECTED]:1] Playback("SIP/5134-088a9c90",
"all-circuits-busy-now|noanswer") in new stack
-- <SIP/5134-088a9c90> Playing 'all-circuits-busy-now' (language 'en')
== Spawn extension (macro-outisbusy, s, 1) exited non-zero on
'SIP/5134-088a9c90' in macro 'outisbusy'
== Spawn extension (macro-outisbusy, s, 1) exited non-zero on
'SIP/5134-088a9c90'
--------------------------------------------
[EMAIL PROTECTED]:/etc/asterisk $ ztcfg -vvvvv
--------------------------------------------
Zaptel Version: 1.4.12.1
Echo Canceller: MG2
Configuration
======================
Channel map:
Channel 01: FXS Kewlstart (Default) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Slaves: 02)
Channel 03: FXS Kewlstart (Default) (Slaves: 03)
Channel 04: FXS Kewlstart (Default) (Slaves: 04)
Channel 05: FXS Kewlstart (Default) (Slaves: 05)
Channel 06: FXS Kewlstart (Default) (Slaves: 06)
Channel 07: FXS Kewlstart (Default) (Slaves: 07)
Channel 08: FXS Kewlstart (Default) (Slaves: 08)
8 channels to configure.
-------------------------------------
[EMAIL PROTECTED]:/etc $ cat /proc/zaptel/*
--------------------------------------
Span 1: WCTDM/0 "Wildcard TDM800P Board 1" (MASTER)
IRQ misses: 1
1 WCTDM/0/0 FXSKS
2 WCTDM/0/1 FXSKS RED
3 WCTDM/0/2 FXSKS RED
4 WCTDM/0/3 FXSKS RED
5 WCTDM/0/4 FXSKS RED
6 WCTDM/0/5 FXSKS RED
7 WCTDM/0/6 FXSKS RED
8 WCTDM/0/7 FXSKS RED
--------------------------------
/etc/asterisk/zapata.conf
----------------------------
;
; Zapata telephony interface
;
; Configuration file
[trunkgroups]
[channels]
language=en
context=from-zaptel
signalling=fxs_ks
rxwink=300 ; Atlas seems to use long (250ms) winks
;
; Whether or not to do distinctive ring detection on FXO lines
;
;usedistinctiveringdetection=yes
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=800
rxgain=0.0
txgain=0.0
group=0
callgroup=1
pickupgroup=1
immediate=no
;faxdetect=both
faxdetect=incoming
;faxdetect=outgoing
;faxdetect=no
;Include genzaptelconf configs
#include zapata-channels.conf
;Include AMP configs
#include zapata_additional.conf
------------------------
/etc/zaptel.conf
------------------------
# Autogenerated by /usr/local/sbin/genzaptelconf -- do not hand edit
# Zaptel Configuration File
#
# This file is parsed by the Zaptel Configurator, ztcfg
#
# It must be in the module loading order
# Span 1: WCTDM/0 "Wildcard TDM800P Board 1" (MASTER)
fxsks=1
fxsks=2
fxsks=3
fxsks=4
fxsks=5
fxsks=6
fxsks=7
fxsks=8
# Global data
loadzone = us
defaultzone = us
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
