On Sat, 2004-01-03 at 17:55, John Coll wrote: > ; > ; liza:/etc/asterisk/sip.conf > ; > [general] > port = 5060 > bindaddr = 0.0.0.0 > externip = 10.0.1.198 > > [5702] > type=friend > host=dynamic > context=johnhome > reinvite=no > canreinvite=no > qualify=300 > callerid="John workroom #1" <5702> > mailbox=5702 > nat=yes > > [5703] > type=friend > host=dynamic > context=johnhome > reinvite=no > canreinvite=no > qualify=300 > callerid="John workroom #2" <5703> > mailbox=5703 > nat=yes
> And now dial 5703 from 5702. 5703 rings but when 5703 is taken off hook no > voice path is established and both phones give rapid beep beep beep after a > few seconds. The following has been cut a bit but I hope I've left something > useful in there.... > Isn't this the codecs problem? Try adding :- disallow=all allow=ulaw allow=alaw into both of your sip.conf descriptions. -- Dave Cotton <[EMAIL PROTECTED]> _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
