2008/10/29 Alan Lord <[EMAIL PROTECTED]> > Olivier wrote: > <snip /> > > I'll reply to the correct thread > > > > [featuremap] > > blindxfer => ## ; Blind transfer > > ;disconnect => *0 ; Disconnect > > ;automon => *1 ; One Touch Record > > atxfer => A ; Attended transfer > > > > so set atxfer to 'A' and DTMF relay Application signal on the Gigaset > to > > 'A' (without quotes) > > > > and transfer works as expected > > > > Robb > > > > Thanks for replying ! > > I'll give it a try and report to the list > > I just tested this and it seems to work with the Siemens S685IPs. This > thread was such a coincidence. We were trying to get attended transfer > to work last night but setting the atxfer to "normal" things like *2 > just didn't work. > > I just set my S685IP base station to A for the Application Signal and > set A in the features.conf and behold, when I now press the R key, > Attended Transfer :-) > > Thanks > > Alan
Alan, Did you get any success with MWI ? With mine, Asterisk is getting 481 replies whenever Asterisk sends NOTIFY updates. Cheers > > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
_______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users