Hi everyone,
Currectly I'm having some troubles to get correct status of my calls throug
ISDN lines, when outbound calls don't get its destination I always receive
NO ANSWER as ${DIALSTATUS} despite the fact I know the target number
doesn't exists or is busy at that time.
Maybe there is something I must change in my zaptel.conf or zapata.conf,
current configs follows:
#### *zaptel.conf*
# Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" (MASTER)
span=1,1,0,ccs,hdb3
# termtype: te
bchan=1-15,17-31
dchan=16
#### *zapata.conf*
[channels]
language=en
context=default
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=no
threewaycalling=yes
transfer=yes
canpark=no
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.5
txgain=0.0
immediate=yes
busydetect=yes
busycount=4
busypattern=500,500
answeronpolarityswitch=yes
hanguponpolarityswitch=yes
;*groups*
group=2
context=incoming
immediate=no
switchtype=euroisdn
signalling=pri_cpe
channel=32-46,48-62
#### *extensions.conf*
exten => _9.,n,Dial(Zap/g2/${EXTEN:1})
Asterisk version is: 1.4.21.1 and I'm using a Digium TE420P card to connect
to ISDN.
Thanks in advance,
Daniel Arohuanca
+51 1 994149553
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
