Hi all,
I have a question regarding connection of two Asterisk servers to our PBX. Each
Asterisk server has one PCI E1 card, and they are in failover mode with Linux
HA. On our PBX we have only one E1 card towards Asterisk servers.
My question is how to connect these two Asterisks to one E1 card on PBX, and
when primary Asterisk server fails not to have to manually pull out E1 cable
from primary server and plug it in secondary server in order to have active
connection to E1 card on PBX.
Is there some kind of splitter which, on one side can accept two E1 connections
from Asterisks and on the other side one E1 link from PBX. This splitter must
also recognize towards which one of two E1 links on Asterisk side it should
send signals to. eg. when primary Asterisk fails this splitter should send
signals to its eg. port 2 (connection towards secondary Asterisk).
I would be most grateful if someone could provide me with a link to such
products.
Thanks
Dubravko
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
