Hi, I would be interested in any reports of anyone getting a T.38 FAX to send or receive successfully with Zoiper. I've tried to test my T.38 implementation against more than one revision of Zoiper, and I yet to see it behave sanely.
Steve Olivier wrote: > > > 2008/12/3 [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> <[EMAIL PROTECTED] > <mailto:[EMAIL PROTECTED]>> > > I tried sending faxes through Zoiper (Zoiper to Zoiper) last week > and the program crashed. After an update it stopped crashing but > still could not send a FAX. I then tried Kapanga (the free version > has a limited 30 > days FAX sending capability) and it worked. This might be of > little use > > > No it has much value to me. > > I was already suspicious about Zoiper as I could send fax between > other endpoints. > > Originally, I thought using the same software on both could help to > validate other settings (tuning of sip.conf) but to my surprise I > couldn't find much about Zoiper fax capabilities. > I have the rough feeling Zoiper can't receive fax at the moment or > either, tuning Asterisk to allow that is not simple. > For sending, I won't rate it at the moment. > > > > to you > since I used Freeswitch with t38 pass-trhough, but my point is : > first find a client > that supports t38 FAX capabilites that work and then try asterisk. > Our company had success > sending FAX using t38 through asterisk along time ago so I guess > you will get there sooner or later. > > Olivier wrote: >> Hi, >> >> 1. Has anyone got any success when send a TIFF file form one >> zoiper softphone to another ? >> I tried using Zoiper 2.18 free edition in windows but I'm seeing >> 415 Unsupported media replies. >> >> 2. Here (http://www.voipinfo.org/wiki/view/Asterisk+T.38), you >> can read : >> "Also, try using: >> >> t38_udptl=yes >> t38pt_rtp=no >> t38pt_tcp=no >> >> ... in the general section of the sip.conf and under the VoIP >> provider account as well as the fax account. " >> >> But above, you can read >> "[general] >> t38pt_udptl = yes " >> >> Has this parameter name changed between 1.4 to 1.6 from t38_udptl >> to t38pt_udptl ? >> A asterisk remains silent when I add an unknown parameter >> "foo=bar", it would perfect if someone could point the right name >> (t38_udptl or t38pt_udptl). >> >> Regards > _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
