----- Original Message ----- From: "Tzafrir Cohen" <[EMAIL PROTECTED]> To: [email protected] Sent: Thursday, 4 December, 2008 12:01:54 GMT +00:00 GMT Britain, Ireland, Portugal Subject: Re: [asterisk-users] BT - ISDN30 - International Calls not working, everything else is fine :(
On Thu, Dec 04, 2008 at 11:49:50AM +0000, Mr Gabriel wrote: > Dear All, > > Thank you for taking the time to read this post - I am *confused!* as to why > my asterisk setup does not work as it should. I have an ISDN 30 connection > for telephony, a Sangoma card, and asterisk installed. > > Incoming calls, and outgoing calls work 100%. Making an international call, > results in silence, or the error message all circuits are busy > > Numbers being passed to the trunk for the call > > • National is 020xxxxxxxx will result in 20xxxxxxxx being sent and dialled, > which works > • Mobile is 07xxxxxxxxx will result in 7xxxxxxxxx being sent and dialled, > which works > • International 00x[any number of digits] will result in 00x[any number of > digits] which does not work > > I do not see why this does not work. I do know that for every call, the flag > sent is national - how can I make sure the correct flag is sent for the call? > By flag, I mean the TON, (type of number) > > Any assistance will be greatly appreciated. Look into pridialplan in zapata.conf / chan_dahdi.conf . I'm not sure if 'pridialplan = unknown' is applicable. If not: something of the sort of internationalprefixx should help. "Gabriel Says" The pridialplan is set to pridialplan=unknown, and internationalprefix=00, I have rebooted a few times, so I know this is what is currently loaded. I am using freepbx as a web interface, is it possible that there are conflicting settings?
_______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
