Thanks a lot, will let you know how things are going when I get them to turn on two way dialing . By the way any pointers on how to connect to Portmaster ? Looks like we are going to have to share some PRIs lines with portmaster (dialup)
FYI, I am sticking with Asterisk 1.4 for now ... Thanks! Gondar On Sat, Dec 6, 2008 at 3:49 PM, Trevor Peirce <[EMAIL PROTECTED]> wrote: > Gondar Monn wrote: > > Hi there! > > Does anyone deal with Telus in BC ? We have some PRI lines that were > > used for dialup, would like to convert them for pbx system, talked > > with some technicians @ Telus, but the information given was not > > clear, kind of: "try this see if it works...." Does anyone here have > > the settings required to talk to there equipment ? > > A few years ago I had a PRI from TELUS. The winning zaptel.conf line: > > span=1,1,0,esf,b8zs > bchan=1-23 > dchan=24 > > And in zapata.conf it was > > switchtype=national > pridialplan=unknown > prilocaldialplan=national > signalling=pri_cpe > > > These are both from the asterisk 1.2 days so a lot may have changed > between now and then... > > Hope this helps, > Trevor > > > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
_______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
