2008/12/9 Shaun Ruffell <[EMAIL PROTECTED]> > David fire wrote: > > First zaptel is dahdi now.... > > second it isnot in /etc/dahdi or /etc/asterisk.... > > i know because i remember one time a guy from digium toldme where to put > > it.... > > > > > Hopefully you are now using DAHDI so I'll just comment about DAHDI loads > the > drivers. > > When you run "make config" in the dahdi-tools projects, a couple of > different > files are loaded that control the loading of modules. > > /etc/modprobe.d/dahdi.blacklist is used to instruct udev to *not* > automatically > load the drivers when the system is booting. All the DAHDI drivers that > support > hardware devices are listed there in order to eliminate race conditions > when the > register their spans with the core dahdi driver. Even though the wctc4xxp > does > not register a span, it is there to remain consistent. > > /etc/init.d/dahdi is the script that should be configured to run on boot to > load > your drivers and configure your spans. This script reads > /etc/dahdi/modules to > determine which drivers it should load (by default, all the drivers are > loaded). > > So you will want to make sure that wctc4xxp
do you mean wct4xxp ? because wct4xxp is present in my setup while wctc4xxp is not. > is in /etc/dahdi/modules, and then > run /etc/init.d/dahdi start to load the driver. > > Cheers, > Shaun > > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
_______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users