Langdon Stevenson wrote: > Hi > > I have a Dell PE2300 with a Digium TDM400P line card in it (with one > module to handle an inbound phone line). This is running on a Fedora 8 > system with Asterisk 1.4.21.2-1.fc8 > > This system has been working nicely for about 12 months. After a recent > move of office and relocation of the server Asterisk is back on line, > but the TDM line card has stopped working.
This problem has now been fully resolved (thanks to all who contributed to assisting me). For the sake of completeness here is how I resolved the problem: This instruction assumes that Asterisk and the Fedora 8 Zaptel packages 1. Download the Zaptel source from: http://downloads.digium.com/pub/telephony/zaptel/ to: /usr/src/ You have to do this as the Fedora 8 Zaptel packages don't provide the drivers! 2. Extract the source: tar -xf <source code filename> 3. CD /usr/src/<source code directory> 4. ./configure 5. make 6. make install 7. make config (to install init scripts) 8. ztcfg -vvvv This initialises the channels on the card, it is critical! 9. reboot (may not be necessary, but it will tell you if the init scripts are working as they should 10. You should now have a green light on the card for each line that has a module attached. This should now give you functioning drivers for Asterisk to use the TDM card. Note: you still need to configure the /etc/zaptel.conf file and /etc/asterisk/zapata.conf correctly! This is covered elsewhere in heaps of detail. Langdon _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users