Is your ATA running SIP if so, what version (2.16?) With SIP, then * extensions.conf and sip.conf files are configured you should see the following
asterisk3*CLI> sip show peers Name/username Host Mask Port Status 3000/3000 10.0.0.30 (D) 255.255.255.255 5060 OK (15 ms) 9000/9000 10.0.0.90 (D) 255.255.255.255 5060 OK (47 ms) ext 3000 is the Cisco ATA 186 and ext 9000 is the Cisco 7960 to test an extension from the CLI CLI>dial <ext. #> you should hear your ATA ring Doug Osvaldo Mundim Junior wrote: > Hey all! > > I'm having problems trying to set up an ATA 186 with my Asterisk box. When I > get the phone to place the call, I type the extension and I only get busy > signal after 5 seconds. So I can't call my Asterisk box from my ATA and > either call from my Asterisk to my ATA. > > Does anybody know what can be happing? > > Log is attached.. > > tks > regards > Oz > > ------------------------------------------------------------------------ > Name: ast_log.txt > ast_log.txt Type: Plain Text (text/plain) > Encoding: quoted-printable -- FREE Unlimited Worldwide Voip calling set-up an account and start saving today! http://www.voippages.com ext. 7000 http://www.pulver.com/fwd/ ext. 83740 free IP phone software @ http://www.xten.com/ http://iaxclient.sourceforge.net/iaxcomm/ _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
