I just found an old bug report at bugs.digium.com with exactly the same problem.
It's really too bad this bug wasn't addressed: http://bugs.digium.com/view.php?id=7315 --- On Fri, 1/9/09, Vieri <[email protected]> wrote: > I'm trying to figure out how to reload iax2 (without > breaking existing calls) so it can listen on a new IP > address (like "ip addr add local ..."). This alias > IP is added/removed by a custom process (script) for > clustering purposes. > > The iax.conf file contains "bindaddr=0.0.0.0". > > I tried a "iax2 reload" (executed without errors > or warnings) but I'm still not able to connect to the > alias IP from another Asterisk server within the same LAN > (no firewalls of any type in the middle). > > On the other Asterisk server I run a "iax2 show > peers" and get "status UNREACHABLE" for the > alias IP trunk (eg. 192.168.250.115 in the example below). > > However, if I specify a non-alias IP address on the other > server's trunk settings then a "iax2 show > peers" shows a "status OK" (eg. > 192.168.250.111 in the example below). > > Just for your information, the IP settings on the server > I'm trying to connect to are: > # ip addr show eth1 > 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 > qdisc pfifo_fast qlen 1000 > link/ether 00:1d:60:b0:25:10 brd ff:ff:ff:ff:ff:ff > inet 192.168.250.111/24 brd 192.168.250.255 scope > global eth1 > inet 192.168.250.115/24 brd 192.168.250.255 scope > global secondary eth1 > inet6 fe80::21d:60ff:feb0:2510/64 scope link > valid_lft forever preferred_lft forever > > This Asterisk server has version 1.2.30. > > The other "connecting" Asterisk server has > version 1.4.21.2. > > Any ideas as to what I could try? > > Vieri > _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
