I have currently following the instructions at- http://www.voip-info.org/wiki/view/QoS+Cisco
I am using a Cisco 877 router with an ADSL2+ connection. My upstream bandwidth is around 1Mbps, and my downstream around 4-5Mbps. I have two PSTN side interfaces - atm0 and dialer0 (dialer0 is where the ISP details are configured and the interface that the WAN side IP is applied on) Now which interface to I apply the QOS on? I would have thought dialer0, but for some reason this interface does accept is citing that it only has "56kbps" of bandwidth for some reason. Now I could fix it's bandwidth at 1000kbps, but as anyone who uses ADSL will know, this may not be a good idea as ADSL is rate adaptive, meaning that the bandwidth can increase and decrease due to line conditions. What do I do? I tried "bandwidth inherit" though I really don't know how this command works and it doesn't seem to make it want to 'inherit' the current status of atm0... Michael _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
