Hi all, I tested with few Asterisk versions from 1.4.18 to 1.4.21, same result.
Here is the problem: I have a peer -which is peer AND user- setted up like this [MyPeer] ; type=peer host=xxx.xxx.xxx.139 deny=0.0.0.0/0.0.0.0 permit=xxx.xxx.xxx.136/255.255.255.248 ;IP address from range 138 to 142 permit=yyy.yyy.yyy.yyy/255.255.255.255 context=from-MyPeer dtfmode=auto disallow=all allow=ulaw,alaw insecure=port,invite nat=yes canreinvite=no call-limit=15 accountcode=MyPeer On incoming calls, when the peer address is the one terminating with .139 everything is OK. If I change the external IP from the peer *ON* the peer machine to let's say .140 (or any other permitted address from this peer), incoming calls are not recognized despite the deny/permit stanza. If I modify the host to .140 in my peer definition, it's again working normally. Question is: why even by allowing in the permit stuff the allowed IPs from a peer, Asterisk does only accept calls from those peers if the peer machine has the IP address from the host definition in my peer sip.conf Thanks for any hint. -- Daniel _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
