On Sat, Jan 24, 2009 at 06:38:58PM -0500, j...@j4computers.com wrote: > This is, hopefully, just a case of brain fade. > > With zapata.conf and zaptel.conf in place, asterisk loaded, no dial > plan and all LEDS on the card lit, I get no dial tone, plugging an > analog phone into ports 1 or 2, only a buzz and click.
What version of asterisk is it? What is the output of: cat /proc/zaptel/* asterisk -rx 'zap show channels' > > zaptel.conf - > > defaultzone=us > loadzone=us > fxoks=1,2 > fxsks=3,4 > > zapata.conf > > [channels] > > signalling=fxo_ks > language=us > context=phones-1 > group=0 > ##switchtype=national > ##pridialplan=national Use ';' for comments. '#' are for preprocessor directives. This happens to also disable almost any line, but also create an annoying warning in the logs. Have you looked at the logs, BTW? > channel=1 This only defines the first port . What about 2? > > signalling=fxs_ks > language=us > context=line-1 > group=0 > ##switchtype=national > ##pridialplan=national > channel=4 Same comments: what about 3? It is also normally kind of pointless to put both phones and POTS lines in the same group (group 0, in your case). -- Tzafrir Cohen icq#16849755 jabber:tzafrir.co...@xorcom.com +972-50-7952406 mailto:tzafrir.co...@xorcom.com http://www.xorcom.com iax:gu...@local.xorcom.com/tzafrir _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users