This worked for me Exten => s,1,Answer() Exten => s,n,Dial(Zap/g1/w5551212)
What happens is that * doesn't go "full duplex" until it does a "Native Bridge". The Answer Command creates a temporary bridge until the real one can take effect. -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of James Lamanna Sent: Tuesday, January 27, 2009 12:38 PM To: [email protected] Subject: [asterisk-users] Muted sound on a Linksys 962 Hi, One of our customers has an issue with the callee not being able to hear them. It seems to happen very frequently on one number in particular where there are about 3 IVR menus to dial through before getting to a live person. However, this does not happen on every call. Running tcpdump on the RTP packets, I can see that RTP is setting sent, but the values in the packet are all very close to 0xFF or 0x7F (which is 0 or -1 once you translate it using G.711). Could this be some issue with the phone muting audio because it's "stuck" sending DTMF? DTMFMode is rfc2833 on the Asterisk side and Auto on the phone side. Thanks. -- James _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
